Here’s what to try first, the signs your PS5 needs an internal cleaning, and what that cleaning actually involves.

Why PS5s Overheat

The PS5 pulls cool air in through the front and sides and pushes hot air out the back. A big fan moves that air across a heatsink that draws heat away from the main chip. Anything that gets in the way of that airflow makes the console run hotter and the fan spin faster and louder. The usual causes:

• Not enough space around the console. Tight TV cabinets and shelves trap hot air.
• Dust. Over time it builds up on the fan blades and packs into the fins of the heatsink. You can’t see most of it from the outside.
• Pet hair and carpet. A console on the floor or on a rug pulls in a lot more of both.
• A warm room. Direct sun, a nearby heater or a hot garage in summer all add up.

Safe Things to Try at Home First

None of these involve opening the console beyond what Sony intends, so they’re safe to do yourself.

Give it room to breathe

• Leave several inches of open space around the PS5, especially behind it where the hot air comes out. Sony’s own guidance asks for at least 10 cm (about 4 inches).
• Take it out of closed cabinets. If it has to live in one, leave the doors open while you play.
• Keep it off carpet and rugs, and away from heaters, vents and direct sunlight.
• Don’t stack anything on top of it or right next to the vents.
• Standing it up or laying it flat are both fine. Use the stand that came with it either way.

Clean the outside vents and dust catchers

• Turn the PS5 off completely (not rest mode) and unplug it.
• Use a soft brush or a vacuum on low with a brush attachment on the front and back vents.
• On the original PS5 you can take off the white side covers and vacuum the two dust catcher holes. Sony designed it so you can. Check Sony’s instructions for your model before you start.
• If you use canned air, give short bursts from a distance and hold the can upright. Don’t spin the fan with air, and don’t push dust deeper inside.

Keep the system software updated

Sony has updated how the PS5 controls its fan in the past, so make sure your console is on the latest system software.

Signs Your PS5 Needs a Professional Internal Cleaning

If you’ve done all of the above and the console is still hot or loud, the dust is probably inside, on the fan and heatsink, where you can’t reach it without taking the console apart. Watch for these signs:

• The fan is still loud even in menus or with lighter games
• The fan rattles, grinds or clicks
• You get an on-screen warning that the PS5 is too hot
• The console shuts itself off while you’re playing
• Games stutter or freeze after the console has been on for a while
• You can see thick dust or pet hair in the vents, even after vacuuming
• It’s been a few years since you bought it and it’s never been cleaned inside

If your PS5 is shutting down or showing heat warnings, stop gaming on it until it’s checked. Running it hot over and over is hard on the parts inside.

Why We Don’t Recommend Opening It Up Yourself

There are plenty of videos showing a full PS5 teardown. It can be done, but it’s easy to go wrong. The console uses a lot of small screws and delicate ribbon cables. On many models, the main chip uses liquid metal instead of regular thermal paste, and if it gets disturbed or spills, it can short out parts on the board. A cracked clip, a torn cable or a stripped screw can turn a cleaning into a repair.

What a Professional PS5 Cleaning Involves

A proper internal cleaning is more than blowing air into the vents. Here’s what our PS5 cleaning includes:

1. Disassembly down to the fan and cooling system.
2. Cleaning the fan blades and housing, and checking that the fan spins freely and quietly.
3. Clearing the heatsink fins, where packed dust blocks airflow the most.
4. Cleaning the dust catchers, vents and power supply openings.
5. Reapplying liquid metal on the main chip on PS5 models that use it, and checking the rest of the cooling system for anything that needs attention beyond dust.
6. Testing after reassembly to make sure it runs and sounds the way it should.

If we find something besides dust, like a failing fan, we’ll explain it and give you a quote before doing anything more.

Where to Take Your PS5 to Get Cleaned

All three iParts and Phone Repairs stores do PS5 cleaning and overheating service, along with HDMI ports, disc drives and controllers. See everything we fix on our PS5 repair page.

• Folsom, CA: 608A East Bidwell St., next to Big 5 in Model Plaza. Close to El Dorado Hills, Orangevale, Rancho Cordova and the rest of the Sacramento area. (916) 936-9316
• Vacaville, CA: 813 Davis St. Suite C, serving Vacaville, Dixon and Fairfield. (707) 761-5956
• Gresham, OR: 1925 NE Division St, close to Troutdale, Fairview and East Portland. (503) 908-2727

No appointment needed, but give your store a quick call first so we can make sure we’re ready for your console. Every service, including cleaning, starts with our $39 diagnosis, which goes toward the cost, and we’ll give you a quote before any work begins. Repairs come with our 6-month warranty on parts and labor (accidental or physical damage isn’t covered).

Bring the PS5 and its power cord. If it’s been dropped, gotten wet or been opened before, let us know.

PS5 running hot? Call (800) 619-6924 or get an instant quote, and we’ll help you get it cool and quiet again.

The post PS5 Overheating or Loud Fan? When to Get It Professionally Cleaned appeared first on iParts and Phone Repair.

Below we cover what’s worth checking yourself, how a loose or damaged Xbox HDMI port usually shows up, and what’s involved in fixing it properly.

First: Is It the Xbox, the Cable or the TV?

A “no picture” problem has three possible sources, and the cheapest fixes come first:

• Swap the HDMI cable. Use the high-speed cable that came with the console if you still have it. Higher resolutions and refresh rates are more demanding on the cable, and a cheap or damaged one can fail at 4K/120 even if it worked at a lower setting.
• Try another TV input, then another TV or monitor. If the Xbox works on a different screen, the console is fine.
• Take the soundbar or receiver out of the chain and connect the Xbox straight to the TV.
• Do a full power cycle. Hold the Xbox button on the console for about 10 seconds until it shuts off, unplug the power cord for a minute, then turn it back on.

Try a low-resolution startup

If the TV doesn’t support the resolution or refresh rate the Xbox is set to output, you can get a black screen even when nothing is broken. Xbox consoles have a low-resolution startup mode that resets the video output, and the button combination is different on disc and digital models. Microsoft’s Xbox support site lists the steps for your exact console. If the picture comes back after that, the hardware is almost certainly fine.

Signs the HDMI Port Is the Problem

When the cable, TV and settings are ruled out, look at the port itself (with the console unplugged):

• The cable feels loose or the port shifts when you plug in a cable. This is common after a console gets pulled off a shelf by its cables or moved while plugged in.
• The picture only works if the cable is held at a certain angle, or the signal drops when the console is bumped.
• Visible damage: a bent metal shell, a crooked centre tongue, or pins that look pushed in or out of line.
• Sound but no picture, or a picture with sparkles, flicker or colour problems, which can point to some of the HDMI connections failing while others still work.
• The problem started right after a move, a fall or a spill.

Keep in mind that damage isn’t always visible. The connections that hold the port to the main board can crack without the port looking any different, and the video circuitry behind the port can fail too. That’s why a bench diagnosis is worth getting before you buy parts or a new console.

Series X vs. Series S: What’s Different?

Both consoles have a single HDMI output soldered directly to the main board, so a damaged port on either one means board-level repair, not unplugging and swapping a part. The bigger, heavier Series X tends to sit in one place. The small, light Series S is more likely to be moved between rooms, tossed in a bag or knocked off a dresser while it’s plugged in, which puts more strain on the port. We see both come in with the same kind of damage: a port that’s been levered sideways until it cracked loose.

What Professional Xbox HDMI Port Repair Involves

1. Diagnosis first. We confirm the fault with a known-good cable and display, then open the console and inspect the port and the board around it under magnification.
2. Port removal. The old port is removed with controlled heat and the right tools, so the board and nearby components aren’t stressed.
3. Pad and trace check. If the port was ripped up hard enough to lift pads, those need repairing before a new port goes on.
4. New port installed and inspected, connection by connection.
5. Full testing on a real display before reassembly, and again after.

When it’s more than a port

Sometimes the port is fine and the fault is further down the video path on the board. Sometimes a home repair attempt or a previous shop has damaged the board. We’ll explain what we find and quote you before going any further. If it’s not worth fixing, we’ll tell you that too.

Is Repairing an Xbox HDMI Port Worth It?

For most people, yes. If the console powers on, the fans spin and the controller connects, the expensive parts are usually still working, and replacing just the port typically costs much less than buying a new console. You also keep your console as it is, with its storage and setup. The repair stops making sense when the board has extensive damage, which is exactly what a diagnosis tells you.

Protect the New Port

• Route the HDMI and power cables so they can’t be snagged by feet, pets or vacuum cleaners.
• Leave a little slack behind the console. A tight cable pulls on the port all the time.
• Unplug everything before moving the console, every time.
• Plug the cable straight in, never at an angle.

Xbox Repair at iParts: Folsom, Vacaville and Gresham

HDMI port repair is part of our game console repair service for Xbox, PlayStation and Nintendo Switch. Diagnosis is $39 and goes toward your repair if we can fix it. Completed repairs carry our 6-month warranty on parts and labor (does not cover accidental or physical damage).

No appointment is necessary, but for board-level console work a quick call to the store helps us confirm parts are on hand:

• Folsom: 608A East Bidwell St. (next to Big 5 in Model Plaza), (916) 936-9316
• Vacaville: 813 Davis St. Suite C, (707) 761-5956
• Gresham: 1925 NE Division St., (503) 908-2727

If your console has a different problem, like a disc drive that won’t read or a controller that drifts, our earlier article What to Do When Your Game Console Breaks covers more common issues.

Don’t let one cable mishap retire your Xbox. Get an instant quote or call (800) 619-6924 to get it diagnosed.

The post Xbox Series X or Series S Not Showing a Picture? HDMI Port Problems Explained appeared first on iParts and Phone Repair.

The good news is that this problem can usually be narrowed down with a few simple tests. The cause is almost always one of three things: the dock setup, the dock itself, or the USB-C port on the console. Here’s how to tell which.

How the Switch Gets to Your TV

Unlike a PlayStation or Xbox, the Switch doesn’t have an HDMI port. Video leaves the console through its USB-C port at the bottom, goes into the dock, and the dock converts it to HDMI for your TV. That means a “no signal” problem could be anywhere in that chain: the console’s port and the circuitry behind it, the dock’s connector and electronics, the dock’s power adapter, the HDMI cable, or the TV.

Step 1: Check the Setup (This Fixes More Than You’d Think)

• Use the official power adapter that came with the Switch, plugged into the dock. Phone chargers, laptop chargers and third-party bricks often don’t provide the power the dock needs to output video, even if they charge the console.
• Reset the dock. Unplug the power adapter and the HDMI cable from the dock and from the wall for at least 30 seconds. Then reconnect in this order: power adapter to the wall, power to the dock, HDMI from the dock to the TV, and finally the console.
• Try a different HDMI cable and TV input.
• Turn off the TV’s HDMI-CEC or auto input switching temporarily if it’s flipping inputs on its own.
• Update the console if you can, in handheld mode.

Nintendo’s support site has a troubleshooting page for a blank TV screen, and it’s worth following those steps before booking a repair.

Step 2: Swap Tests to Isolate the Fault

The single most useful test is to try another dock, borrowed from a friend, or try your dock with another Switch.

• Your Switch works on a friend’s dock: your dock (or its power adapter) is the problem.
• A friend’s Switch works on your dock: your console is the problem, most often the USB-C port or the circuitry behind it.
• Neither works with anything: look again at the power adapter, cable and TV.

Clues that point to the console’s USB-C port

• The Switch charges slowly, intermittently or only at an angle in handheld mode too.
• The cable or dock connector feels loose or wobbly in the port.
• You can see lint, debris, bent pins or scorch marks in the port (look with a flashlight, console off).
• The problem started after the Switch was dropped while charging or forced into the dock at an angle.
• The console gets unusually warm near the bottom edge while charging.

Clues that point to the dock

• The Switch charges normally from its adapter plugged straight into the console.
• The dock’s green light behaves strangely, or there’s no picture with any cable or TV.
• The dock has been dropped or had liquid on it.

A Word About Third-Party Docks and Chargers

We often see consoles where the trouble started with a non-official dock or charger. Some work fine, but poorly designed ones can deliver power in ways the Switch doesn’t expect, and that can damage the charging and video circuitry behind the USB-C port. If your Switch suddenly stopped working on the TV after you tried a new dock or travel charger, tell your technician. It changes what they look for.

Switch 2 Owners

The Switch 2 also sends its picture to the TV through the console’s USB-C connection and its own dock, so the same logic applies. Start with the official power adapter and HDMI cable, reset the dock, update the console, then swap-test if you can. Use the dock made for your console generation. The two systems’ docks aren’t interchangeable in every way, so check Nintendo’s compatibility guidance before mixing them.

What USB-C Port Repair on a Switch Involves

The USB-C port on the Switch is soldered to the main board, so replacing it means taking the console apart, removing the old port with controlled heat, cleaning the pads and soldering in a new port. Depending on what failed, the technician may also check the parts that handle charging and video output. Those components can be damaged by the same event that damaged the port, especially after a drop while charging or a problem charger.

Because it’s board-level work, we don’t recommend DIY attempts on the port. The pins are tiny and the board is crowded, and a slipped iron can turn a straightforward repair into a much harder one.

Keep Your Switch’s Port Healthy

• Slide the console straight down into the dock. Don’t rock it in at an angle.
• Don’t play handheld with a stiff cable bending against the port.
• Use the official adapter, or a reputable one designed for the Switch.
• Keep the port free of pocket lint and crumbs. Kids’ consoles collect a lot.
• Use a case that leaves the port fully clear when docking.

Switch Repair Near You

Nintendo Switch repair is part of our game console repair service, along with PlayStation and Xbox. Bring in the console, and the dock, power adapter and HDMI cable you use, so we can test the whole chain and find exactly where it’s failing. Diagnosis is $39 and goes toward your repair if we can fix it. Repairs come with our 6-month warranty on parts and labor (does not cover accidental or physical damage).

Stop by our Folsom store on East Bidwell, our Vacaville store on Davis St., or our Gresham store on NE Division. No appointment needed. Controller acting up too? Controller and gamepad repair is on our console services list as well.

Get family game night back on the big screen. Request an instant quote or call (800) 619-6924.

The post Nintendo Switch Not Showing on the TV? Dock Problem vs. USB-C Port Problem appeared first on iParts and Phone Repair.

This guide walks you through what you can safely check at home, the signs that point to the port itself, and what a proper PS5 HDMI port repair involves, so you can make a good decision before you spend money.

Step 1: Rule Out the Easy Stuff First

HDMI is a two-way conversation between the console and the TV. If either side, or the cable in the middle, has a problem, you get a black screen. Work through these in order:

• Try a different HDMI cable. Ideally use the one that came with the PS5. Cables that get stepped on, bent tightly behind a TV stand or yanked out sideways fail more often than people think.
• Try a different HDMI input on the TV, then a different TV or monitor if you have one. TV ports wear out too.
• Remove anything in between. Soundbars, AV receivers, capture cards and HDMI switches can all break the signal. Plug the PS5 straight into the TV to test.
• Fully power-cycle both devices. Turn the PS5 off completely (not rest mode), unplug the power cord from both the console and the TV for a minute, then reconnect.

Use Safe Mode to reset the video output

If the cable and TV check out, the PS5’s Safe Mode can reset the video settings. With the console fully off, hold the power button until you hear a second beep, then connect your controller with a USB cable and press the PS button. Sony’s Safe Mode menu includes a Change Video Output option, which lets you lower the resolution or change the HDCP mode. If you get a picture in Safe Mode, the port is probably fine and the issue is a setting or a compatibility problem with your TV.

If you get nothing at all, even in Safe Mode, on more than one cable and more than one TV, it’s time to look at the console.

Step 2: Signs the HDMI Port Itself Is Damaged

With the console unplugged, shine a flashlight into the HDMI port on the back of the PS5. Things we commonly find on consoles that come into our shops:

• The port moves or wiggles when you gently insert a cable. The port should feel solid. Movement usually means the solder joints holding it to the board have cracked.
• Bent, pushed-in or missing pins. The centre tongue of an HDMI port is thin. A cable forced in at an angle can fold or snap pins.
• A picture that flickers or only works at a certain cable angle. That’s a classic sign of a failing connection at the port.
• The console was dropped, knocked off a shelf or moved while plugged in. Tripping over the cord is one of the most common causes we see.
• Debris or corrosion inside the port, especially if a drink was spilled nearby.

One important note: a port can look perfect from the outside and still be the problem, because the damage can be in the solder joints or in the small components on the board behind it. That’s why a bench diagnosis matters more than a quick look.

Step 3: What a PS5 HDMI Port Repair Actually Involves

The HDMI port on a PS5 isn’t a plug-in part. It’s soldered directly onto the console’s main board, so replacing it is a board-level soldering job, not a screwdriver swap. A proper repair generally looks like this:

1. Disassembly and inspection under magnification to check the port, the pads it sits on and the traces leading away from it.
2. Removing the damaged port with controlled heat, so the surrounding board isn’t damaged.
3. Cleaning and preparing the pads, and repairing any that were lifted or torn.
4. Soldering a new port and checking every connection.
5. Testing on a real display, including at the console’s normal output settings, before the console goes back together.

Why it isn’t always “just the port”

Sometimes the port is fine and the fault is in the video circuitry behind it. Sometimes a previous repair attempt (or a DIY kit) has damaged the board pads. Both make the repair more involved. A good shop will tell you what it found before doing any work, so you can decide whether it’s worth it.

Should You Try a DIY HDMI Port Kit?

Search results for “ps5 hdmi port repair” are full of DIY kits, and we understand the appeal. Here’s the honest picture: the PS5’s HDMI port has many tiny, closely spaced pins, and the board around it is crowded. Without proper soldering equipment and practice it’s very easy to bridge pins, lift pads or overheat nearby parts. A lot of the hardest PS5 repairs we see started as a home attempt. If you’re not experienced with fine-pitch soldering, you’ll likely spend less overall by having it done professionally the first time.

How to Avoid HDMI Port Damage in the Future

• Leave some slack in the cable so it doesn’t pull sideways on the port.
• Unplug before you move the console, even just across the room or into a backpack.
• Plug and unplug straight in and straight out, never at an angle.
• If you swap the PS5 between rooms often, leave a cable in each room so you’re not working the port every day.
• Keep it ventilated and dust-free. Heat and dust don’t cause port damage directly, but they’re hard on everything else on the board.

Getting Your PS5 Looked At in Folsom, Vacaville or Gresham

HDMI port repair is one of the services listed on our game console repair page, alongside disc drive, black screen and controller repairs. Here’s how it works with us:

• Diagnosis first. We’ll find out whether it’s the port, the board or something else, and give you a quote before any work begins. Diagnosis is $39 and goes toward your repair if we can fix it.
• No appointment needed. Walk into any of our stores. For console board work, we recommend a quick call first so the store can confirm parts availability.
• 6-month warranty on parts and labor (does not cover accidental or physical damage).

In the Sacramento area, our Folsom store is at 608A East Bidwell St. in Model Plaza, an easy stop from El Dorado Hills, Orangevale and Rancho Cordova. In Solano County, our Vacaville store on Davis St. serves Vacaville, Dixon and Fairfield. In Oregon, our Gresham store on NE Division St. is close for gamers in Troutdale, Fairview and East Portland. Not near a store? Use our mail-in repair option.

Bring the PS5 along with the power cord and the HDMI cable you’ve been using. If the problem started after a drop, a spill or an earlier repair, tell us. It helps us diagnose it faster.

Ready to get back to gaming? Get an instant quote or call (800) 619-6924, and we’ll help you figure out what your PS5 needs.

Need it fixed? See our HDMI port repair service page.

The post PS5 No Signal? How to Tell If It’s the HDMI Port (and What the Repair Involves) appeared first on iParts and Phone Repair.

Common Cell Phone Problems We Fix in Folsom

Understanding what’s wrong with your device is the first step toward getting it fixed. Here are the most frequent issues we see walk through our door:

• Cracked or shattered screens: The classic drop on concrete or asphalt. You’ll notice spider-web cracks, black spots, or unresponsive touch areas. Sometimes the display still works but the glass is compromised, while other times the LCD itself is damaged and shows discoloration or lines.
• Battery issues: Your phone dies at 30%, takes hours to charge, or gets hot during normal use. Batteries degrade over time — typically after 300-500 charge cycles — and eventually can’t hold enough power to get you through the day.
• Charging port problems: The cable won’t stay connected, charges intermittently, or doesn’t charge at all. Lint, dust, and pocket debris accumulate in the port over months, or the internal connectors become loose from repeated plugging and unplugging.
• Camera malfunctions: Blurry photos, black screens when you open the camera app, or a lens that won’t focus. This can result from drops, moisture exposure, or internal component failure.
• Water damage: Even “water-resistant” phones can fail after submersion or exposure to humidity. You might see condensation under the camera lens, speaker distortion, or the phone cycling on and off repeatedly.
• Speaker or microphone failure: Callers can’t hear you, or you can’t hear them. Audio is muffled, crackly, or completely silent during calls or media playback.

A proper diagnosis involves testing the specific component, checking for corrosion or physical damage, and sometimes running diagnostic software to identify hidden issues. Many problems that seem catastrophic are actually straightforward repairs when handled by experienced technicians.

What to Look for in a Cell Phone Repair Shop

Not all repair shops deliver the same quality of service. Here’s what separates a reliable repair provider from the rest:

Transparent pricing: The shop should provide clear estimates before starting work, with no surprise fees when you pick up your device. Ask for a written quote that specifies what’s included.

Quality replacement parts: Inquire about the grade of parts they use. Premium components ensure your repair lasts and your phone performs as expected. Avoid shops that can’t or won’t tell you about their parts sourcing.

Warranty on repairs: Reputable shops stand behind their work. Ask what’s covered and for how long — this shows confidence in both the parts and the workmanship.

Experience with your device: iPhone, Samsung, Google Pixel, and other brands each have unique repair requirements. The technician should be familiar with your specific model and its common failure points.

Turnaround time: Most screen repairs and battery replacements can be completed same-day. Complex repairs like motherboard work may take longer, but the shop should set realistic expectations upfront.

Local presence: A physical storefront in Folsom means you can walk in, talk to a real person, and have somewhere to return if any issues arise. Mail-in services or kiosks in malls may not offer the same accountability.

For more comprehensive guidance on choosing phone repair services, check out our complete guide to phone repair in Folsom.

How Much Does Cell Phone Repair Cost in Folsom?

Repair costs vary based on your device model and the specific problem. While we can’t quote exact prices without seeing your phone, here’s what typically influences the cost:

Device model and age: Newer flagship phones generally cost more to repair because components are more expensive and the designs are often more complex. An iPhone 14 Pro screen costs more than an iPhone 8 screen, for example.

Type of repair: Screen replacements and battery swaps are usually the most affordable repairs since they’re common and parts are readily available. Water damage repair, motherboard work, or data recovery tend to cost more due to the labor and expertise required.

Extent of damage: A single cracked screen is straightforward. A phone that’s been run over by a car and needs multiple components replaced will naturally cost more.

In the Folsom area, basic repairs like screen replacements typically start in the affordable range for older models, while newer devices and complex repairs run higher. The best approach is to bring your phone in for evaluation — we’ll diagnose it so you know exactly what you’re facing before committing to the repair.

Be wary of prices that seem too good to be true. Ultra-cheap repairs often use low-grade parts that fail quickly, leaving you paying twice to fix the same problem.

What You Can Try Before Visiting a Repair Shop

Some problems have simple solutions you can attempt at home. Here’s what’s safe to try:

Charging issues: Inspect your charging port with a flashlight. If you see lint or debris, power off your phone completely and gently remove buildup with a wooden toothpick — never metal, which can damage the connectors. Try a different cable and power adapter, since these fail more often than ports.

Phone won’t turn on: Force restart your device. For most iPhones (8 and newer), quickly press volume up, then volume down, then hold the side button until you see the Apple logo. For Samsung devices, hold volume down and power simultaneously for 10-15 seconds. This clears temporary software glitches.

Software glitches: Back up your data and restart your phone. If problems persist, check for operating system updates in your settings. Sometimes a fresh update resolves bugs.

When to stop and visit a professional: Never attempt to open your phone yourself, especially if it has a non-removable battery. Don’t apply heat to try to separate a cracked screen. If you see signs of a swollen battery (phone bulging, screen lifting), stop using it immediately and bring it to a repair shop — swollen batteries can be dangerous. Water-damaged phones should never be powered on at home; bring them in while still off to prevent short circuits. If basic troubleshooting doesn’t solve your problem within 15 minutes, you’re likely facing a hardware issue that needs professional diagnosis.

Why Choose iParts & Phone Repairs for Your Cell Phone Repair Needs

When you need cell phone repair in Folsom, our team offers several advantages that keep customers coming back:

We focus exclusively on phone and electronics repair, which means our technicians work on devices like yours every single day. This repetition builds the kind of expertise that catches problems other shops might miss.

Our Folsom location at +19165796408 serves the local community with face-to-face service. You’ll talk directly to the person who will repair your device, not hand it off to a faceless back room.

We use high-quality replacement parts that keep your phone performing reliably. We’re transparent about what we install in your device and stand behind our repairs.

Most repairs are completed the same day, often within an hour for common issues like screen replacements. We know you depend on your phone for work, family communication, and daily life — we prioritize getting it back to you quickly.

Beyond cell phones, we also repair tablets, computers, and other electronics, making us your one-stop shop for all device problems.

Getting Your Phone Fixed Today

Cell phone problems rarely get better on their own — that cracked screen spreads, that weak battery gets weaker, and small issues become big ones. The sooner you address the problem, the more likely it is we can fix it affordably and completely.

Whether you’re in downtown Folsom, near Folsom Lake, or anywhere in the surrounding area, bring your device to our shop or call us at +19165796408 to discuss your repair. We’ll diagnose the problem, explain your options clearly, and get your phone working like it should.

Frequently Asked Questions

How long does a typical screen repair take?
Most screen replacements take 30 minutes to an hour, depending on the device model. We complete many repairs while you wait. More complex issues requiring diagnostics or multiple component replacements may take a few hours or require leaving your device with us.

Will I lose my data during the repair?
Screen, battery, and charging port repairs don’t affect your data — your photos, contacts, and apps remain intact. However, we always recommend backing up your phone before any repair, just as a precaution. Water damage and motherboard issues can potentially affect data, which is why prompt professional service is important.

Do you work on all phone brands?
Yes, we repair iPhones, Samsung Galaxy devices, Google Pixels, LG phones, and other major brands. We service both current models and older devices. If you have an unusual or less common device, call ahead and we’ll let you know if we can help.

Can a water-damaged phone be saved?
It depends on how quickly you act and the extent of exposure. If you bring a water-damaged phone to us while it’s still powered off, we can disassemble it, clean the internal components, and assess what’s salvageable. The longer a wet phone sits — especially if powered on — the more likely corrosion will cause permanent damage. Never put a wet phone in rice; bring it directly to a repair professional.

Written by the iParts & Phone Repairs team — local phone and device repair in Folsom.

The post Cell Phone Repair in Folsom: What to Expect & How to Choose the Right Shop appeared first on iParts and Phone Repair.

Common Phone Problems Folsom Residents Face

Living and working in Folsom means your phone takes a beating. Here are the repairs that come through our doors most often, and what causes them.

Cracked and Shattered Screens: A drop on the concrete at Folsom Lake or a tumble from your car in a parking lot can spiderWeb your display instantly. Modern smartphones use glass that resists scratches well but remains vulnerable to impact damage. You’ll notice touch response issues, black spots spreading across the display, or visible cracks. If the LCD beneath the glass is damaged, you may see color distortion or dead zones that don’t respond to touch.

Battery Drain and Swelling: California heat accelerates battery aging. If your phone dies at 40 percent, takes hours to charge, or the back panel is separating from the frame, your battery has likely degraded. Lithium-ion batteries lose capacity over time, and a swollen battery is a safety concern that needs immediate attention—never press on a swollen battery or attempt to remove it yourself.

Charging Port Failures: Lint, dust, and debris from your pocket or bag compress inside the charging port over months of use. You’ll find yourself angling the cable just right to get a connection, or the phone charges intermittently. Sometimes the port’s internal connectors become loose or corroded, especially if the phone has been exposed to moisture.

Water Damage: Whether it’s the American River, a coffee spill, or unexpected rain, liquid intrusion causes corrosion on internal components. Symptoms appear immediately or develop over days: speaker distortion, camera fog, random shutdowns, or touch problems. Time matters critically with water damage—the longer moisture sits inside, the more corrosion spreads.

What to Look for in a Folsom Phone Repair Shop

Not all repair shops operate the same way. Here’s what separates a quality repair from one that creates new problems.

Diagnostic Process: A professional shop will test your device before quoting a price. For screen repairs, technicians check touch sensitivity, LCD function, and Face ID or fingerprint sensors. For battery issues, they run diagnostic software to check actual capacity versus design capacity. For water damage, they open the device to inspect for corrosion on the logic board and connectors. Be wary of shops that quote prices without examining your specific device.

Parts Quality: High-quality replacement parts make the difference between a repair that lasts and one that fails in weeks. Premium screens should match your original display’s color accuracy and touch response. Batteries should meet or exceed the original specifications. Ask what quality tier the shop uses—you want premium-grade components, not the cheapest available option.

Warranty Coverage: Reputable shops stand behind their work. Ask specifically what the warranty covers and for how long. Does it include both parts and labor? What voids the warranty? Get this in writing before authorizing any repair.

Turnaround Time: Most common repairs—screens, batteries, charging ports—can be completed within an hour or two when parts are in stock. Complex repairs like logic board work or extensive water damage restoration may require a day or more. A shop that rushes through repairs or makes unrealistic time promises may cut corners.

Understanding Repair Costs and Timeframes

Repair pricing varies based on your phone model, the specific problem, and parts availability.

Screen replacements typically represent the most common repair, with costs varying significantly between older and newer models. iPhone screens generally cost more than Android screens for equivalent model years, and larger displays cost more than smaller ones. Samsung flagship models fall into a similar price range as newer iPhones.

Battery replacements are usually more affordable than screen repairs and take less time—often 30 minutes to an hour for most models. This is one of the best value repairs since a fresh battery can extend your phone’s useful life by another year or two.

Charging port repairs involve micro-soldering work on many newer devices, making them more complex and time-intensive. Older phones with modular ports are simpler and less expensive to repair.

Water damage restoration costs depend entirely on what components sustained corrosion damage. A thorough cleaning and minor component replacement may be economical, but extensive logic board damage can approach or exceed the phone’s replacement value. An honest shop will tell you when a device isn’t worth repairing.

Always get a firm quote before authorizing work. Prices should be clear and specific to your device model and problem. If a shop can’t provide an exact quote after diagnosing your phone, that’s a red flag.

Why Choose Local Repair Over Manufacturer Service

Manufacturer repair centers and local shops serve different needs, and understanding these differences helps you make the right choice for your situation.

Speed: Manufacturer service typically requires shipping your device or booking an appointment days in advance, then waiting several days for repair completion. Local shops often complete common repairs the same day, sometimes while you wait. When your phone is your lifeline to work, family, and navigation, time matters.

Cost: Manufacturer repairs, especially for out-of-warranty devices, often cost significantly more than independent repair shops. You’re paying for brand overhead and retail location costs. Local shops operate with lower overhead and can pass those savings to customers while still using premium parts.

Data Privacy: With local phone repair in Folsom, you can often watch the repair process or stay in the shop. Your device never leaves the area. Manufacturer service means handing your phone to shipping companies and multiple handlers. For those concerned about personal data and photos, keeping the device local provides peace of mind.

Flexibility: Manufacturers often refuse to repair devices with any third-party modifications or minor unrelated damage. They may require you to fix multiple issues before addressing your primary concern. Independent shops can focus on your specific problem without forcing unnecessary additional repairs.

The Trade-off: Manufacturer service makes sense for warranty-covered repairs or for those who want manufacturer documentation for resale value. For out-of-warranty repairs where you need speed and value, local repair offers clear advantages. Some features like Face ID on iPhones or fingerprint sensors may have limitations after independent repair, depending on the specific damage and repair type—ask your technician about functionality before proceeding.

What You Can Try Before Visiting a Repair Shop

Some phone problems have simple solutions you can attempt safely at home before spending money on professional repair.

For Charging Issues: Power off your phone completely. Use a wooden toothpick (never metal) to gently remove lint and debris from the charging port. Work carefully to avoid damaging the internal connectors. Try a different charging cable and power adapter—cables fail more often than people realize. If these steps don’t restore normal charging, the port itself likely needs professional repair.

For Performance Problems: Restart your phone fully—not just sleep mode, but a complete power cycle. Clear cached data through your settings menu. Uninstall apps you don’t use regularly. Check storage space; phones slow dramatically when storage is nearly full. If you’re running low on storage, back up photos to cloud storage and delete them from the device.

For Software Glitches: Check if a software update is available through your settings. Many bugs are resolved in updates. If problems persist after updating, check the manufacturer support pages for your specific model—https://support.apple.com for iPhones or https://www.samsung.com/us/support/ for Samsung devices.

When to Stop: Never attempt to open your phone if you lack proper tools and experience. Don’t try to remove a battery yourself, especially if it appears swollen. Don’t apply heat to any device. Don’t power on a water-damaged phone or plug it in to charge—this can cause short circuits that make damage worse. If you’ve tried basic troubleshooting without success, or if you’re dealing with physical damage, water exposure, or battery issues, bring it to professionals who have the right tools and training.

Getting Your Phone Repaired in Folsom

Whether you’re dealing with a cracked screen from a drop at the Folsom Parkway or battery problems that leave you stranded, quality repair shouldn’t require a trip to Sacramento. Local phone repair in Folsom offers the speed and expertise you need to get back to your day. When you’re ready for professional service, call the Folsom location at +1 (916) 579-6408 for a diagnostic and quote.

Frequently Asked Questions

How long does a typical screen repair take?
Most screen replacements take 45 minutes to 90 minutes when parts are in stock. The technician needs time to carefully transfer components, test all functions, and ensure proper sealing. Same-day service is available for most common phone models.

Will repairing my phone void the manufacturer warranty?
If your phone is still under manufacturer warranty, third-party repair may affect warranty coverage for future manufacturer service. However, most phones coming in for repair are already out of warranty—Apple’s standard warranty is one year, and most Android manufacturers offer similar terms. Check your warranty status before deciding between manufacturer and independent repair.

Can water-damaged phones be saved?
Sometimes, but speed is critical. If you bring a water-damaged phone in within hours of exposure, before corrosion spreads, success rates are much higher. Devices that have been powered on after water exposure or left wet for days have much more extensive damage. The only way to know is through professional diagnostic inspection of the internal components.

How can I prevent future phone damage?
Use a quality protective case with raised edges around the screen and camera. Apply a tempered glass screen protector—it’s much cheaper to replace than the actual screen. Keep your phone away from water when possible, and if you’re frequently near water, consider a waterproof case. Clean your charging port monthly with a dry toothpick to prevent debris buildup.

Written by the iParts & Phone Repairs team — local phone and device repair in Folsom, California.

The post Phone Repair in Folsom: Your Complete Guide to Fast, Affordable Service appeared first on iParts and Phone Repair.

Here is the part most people get wrong: what you do in the first hour matters more than almost anything else. Not the model of phone, not how deep it went, not even how long it was under. The first hour.

This guide covers exactly what to do, what to avoid, and why the advice your friend gives you is probably going to cost you your device.

Water resistance is not waterproof — and it wears out

Most modern phones carry an IP rating, and people read that as a guarantee. It is not.

Those ratings are earned in a lab, on a brand-new device, in still fresh water at a controlled depth for a controlled time. Your phone is not a new device in a lab. Every drop it has taken has stressed the seals. Every hot day has softened the adhesive holding it together. If the screen has ever been replaced, the seal is only as good as the work that was done.

Then there is what the water actually is. Lake and river water carries silt and organic matter. Pool water carries chlorine. Salt water is the most destructive of all. IP ratings are tested with clean fresh water — none of the water your phone is likely to fall into behaves the same way.

So a phone rated for water can absolutely be killed by water. We see it constantly.

What to do in the first hour

1. Get it out and power it off immediately. Do not check whether it still works. Do not take a photo to send to a friend. Electricity plus water is what destroys circuits, so cutting the power is the single most valuable thing you can do.
2. Do not plug it in. Not to charge, not to a computer, not to anything. Applying power to a wet board is how a recoverable phone becomes an unrecoverable one.
3. Remove the case, the SIM tray and any memory card. Open every door you can. Cases trap water against the body.
4. Dry the outside and gently shake water out of the ports with the ports facing down. Do not blast it with compressed air, which pushes water further inside.
5. Leave it off and bring it in. Every hour that passes, corrosion spreads further across the board.

That last point is the one people underestimate. Water damage is not a single event — it is an ongoing chemical process. Minerals and contaminants left behind start corroding connections immediately and keep going for days. A device brought in the same day has dramatically better odds than the same device brought in a week later.

The rice myth, and three other things that make it worse

Rice does not work

This is the most persistent piece of bad advice in consumer tech. Rice is not a desiccant in any meaningful sense. It absorbs a small amount of ambient humidity very slowly, and it does nothing at all for liquid sitting on a circuit board inside a sealed housing.

What rice really does is convince you the problem is being handled while corrosion quietly spreads for three days. It also leaves starch and dust in your ports. The phones that “survived the rice” survived despite it, not because of it.

Do not use a hairdryer or put it in the oven

Heat drives moisture deeper into the device, can warp components, and risks damaging a battery that is already in a compromised state. A swollen or punctured lithium battery is a genuine fire hazard.

Do not put it in the freezer

This one circulates online periodically. Freezing creates condensation as the device warms back up, so you end up with more moisture inside than you started with, in more places.

Do not keep turning it on to check

Every attempt to power up a wet device sends current across corroded traces. People often destroy a phone that a technician could have saved, purely by testing it repeatedly over an afternoon.

What actually fixes a water damaged device

Proper water damage treatment is a bench job. The device is opened, the battery is disconnected first, and the board is inspected under magnification for corrosion and for the liquid contact indicators. The board is then cleaned — usually in an ultrasonic bath with the right solution — to remove corrosion and mineral residue that simple drying leaves behind.

After cleaning and drying, components get tested individually. Sometimes the fix ends there. Sometimes a specific part has failed and needs replacing — commonly the battery, the charging port, or the display. Occasionally the damage is genuinely beyond economic repair, and the honest answer is that it is not worth your money.

We offer in-house diagnostics, so finding out which of those three you are looking at does not cost you anything. See our water damage repair page for what the process covers.

It is not just phones

Summer around Folsom Lake, Lake Natoma and the American River claims a lot more than phones.

• Drones — a water landing is survivable surprisingly often, if the battery comes out immediately and it is not powered on again.
• iPads and tablets — poolside casualties, and their larger boards mean corrosion has more to spread across.
• Laptops and MacBooks — a drink spill is the classic. Power off, unplug, turn it upside down like a tent, and bring it in.
• Game consoles — less common, but a knocked-over drink into the vents does real damage.

We also handle water damage on iPhones and Android phones of every make.

Protect your data before anything else

If your device powers on at all after getting wet, and you have not yet backed it up, that window may be short. Get your photos off it the moment you can safely do so.

Better still, set up automatic backup now, before anything happens. The single most upsetting conversation we have is not about a phone that cannot be fixed — it is about a phone that cannot be fixed and held the only copy of someone’s photos.

If the device is already dead and the data matters, say so when you bring it in. Data recovery changes the priorities of the repair, and it is worth telling us up front.

How to avoid the whole problem

• Use a real dry bag on the water. A proper sealed pouch costs very little and works. A sandwich bag does not.
• Assume an older phone has no water resistance left. If your device is two or three years old, or has had a screen replaced, treat it as unsealed.
• Keep it away from the edge. Most drops we see happen from a lap on a boat, a pool ledge, or a back pocket.
• Rinse and dry after salt water or chlorine exposure — even if the device seems fine.
• Back up automatically. Cloud backup turns a disaster into an inconvenience.

Bring it in — the sooner the better

We have stores in Folsom and Vacaville, California, and in Gresham, Oregon, and all locations are open six days a week. You do not need an appointment — walk in. You get a price before any work starts, and repairs are backed by our 6-month warranty on parts and labor.

If you are not close to a store, we also offer mail-in repairs, though with liquid damage specifically, speed matters so much that getting to a store the same day is usually the better call.

Call us on (800) 619-6924, get an instant quote, or find your nearest shop on our locations page.

Frequently asked questions

My phone got wet but it still works fine. Do I need to do anything?
Yes. A device that survived the initial contact can still fail weeks later as corrosion develops. A diagnostic now is much cheaper than a board failure in a month.

How long do I have before it is too late?
There is no hard cutoff, but the odds drop steadily with time. Same day is best. After a week, corrosion has usually done meaningful damage. We will still look at it — we just cannot promise as much.

Does water damage void my manufacturer warranty?
Usually, yes. Liquid damage is typically excluded from standard manufacturer warranties, and most devices have internal indicators that show it. That is a large part of why third-party repair exists.

Can you recover my photos if the phone will not turn on?
Often, yes, but it depends on the condition of the storage. Tell us data recovery is the priority when you drop it off so we approach the repair accordingly.

How much does water damage repair cost?
It depends entirely on what the diagnostic finds — cleaning alone is very different from a board with failed components. You get the price before we start.

Should I just buy a new phone instead?
Sometimes. If the damage is severe on an older device, replacement can be the sensible choice. We will tell you honestly when that is the case rather than sell you a repair that is not worth it.

The post Dropped Your Phone in the Water? What to Do in the First Hour appeared first on iParts and Phone Repair.

iPhone repair in Folsom is what we do every single day at iParts and Phone Repair. We’ve been repairing iPhones, iPads, and other devices since 2014 — and we’ve worked on everything from a simple screen crack to complex water damage cases for individual customers, families, and corporate accounts including the California State Lottery. Our Folsom location is one of three California and Oregon shops, and we handle the full range of iPhone problems: screens, batteries, charging ports, cameras, speakers, water damage, and more.

This guide covers the most common iPhone issues we see, what the repair process looks like, what drives cost, and what to look for when choosing a repair shop in the Folsom and Sacramento area.

Section 1: The Most Common iPhone Problems We Fix

Not every iPhone issue is the same, and not every repair costs the same. Here’s what actually walks through our door most often.

Cracked or Shattered Screens

Screen damage is the single most common iPhone repair request we see. A drop onto concrete, a tile floor, or even a hardwood surface at the wrong angle is all it takes. The damage can range from a clean hairline crack that doesn’t affect function, all the way to a fully shattered display where touch no longer responds and the screen shows black patches or lines.

Modern iPhones use OLED displays from iPhone X onward, which are more vibrant than older LCD panels but also more complex to replace. The display, digitizer, and Face ID hardware all connect through the same screen assembly — which means screen repair on newer iPhones requires transferring the Face ID module correctly or Face ID stops working permanently.

All screen repairs at iParts come with a 6-month warranty on parts and labor. If something goes wrong with the repair, we take care of it.

Battery Not Lasting

Battery degradation is the quiet problem. It builds gradually — your iPhone used to make it through a full day, then it started struggling by late afternoon, and now it’s at 40% by noon and shutting down unexpectedly. Apple’s own battery health system will tell you when your battery has dropped below 80% capacity, which is the point most people start noticing a real difference.

A battery replacement is one of the most cost-effective repairs you can do on an iPhone. It costs a fraction of a new phone and makes an older device feel significantly more reliable again. We carry batteries for all iPhone models and can turn most battery swaps around the same day.

Charging Port Not Working

A charging port that suddenly stops working — or only charges when you hold the cable at a certain angle — is usually caused by one of two things: lint and debris compacted inside the port from pocket use, or physical damage to the port itself. California dust and lint are real contributors here. We see this constantly.

In many cases, a careful professional cleaning resolves the issue without any parts replacement. When the port itself is damaged, replacement is straightforward on most iPhone models and is completed the same visit.

Water Damage

iParts handles water damage repair for iPhones, and Sacramento and Folsom residents have plenty of opportunities for water encounters — from the American River to the Sacramento River, pool season, and rainy winters. Even iPhones with an official IP water resistance rating can take damage from prolonged submersion, hot tub exposure, or older models that no longer have intact seals.

The single most important thing to do if your iPhone gets wet: power it off immediately and bring it in. Do not put it in rice — that’s a myth that delays proper treatment and lets corrosion spread. The sooner we can assess and clean the internal components, the better the recovery outcome. Use our instant quote tool to get an idea of cost, but for water damage, come in as quickly as possible regardless.

Camera Issues

Blurry photos, a camera that won’t focus, a front camera that shows a black screen — camera problems are more common than most people expect, and they don’t always mean the camera module itself failed. Sometimes the issue is a software glitch. Sometimes it’s physical damage to the camera housing or lens. And on some iPhone models, a prior screen repair done elsewhere damaged the front camera flex cable during disassembly.

We diagnose camera issues as part of our in-house diagnostic and can usually tell you within minutes whether it’s a software fix or a hardware repair.

Speaker and Microphone Problems

Muffled audio, a speaker that crackles, a microphone that other callers can barely hear — these are hardware issues that affect how usable your iPhone actually is day to day. Speaker problems are often caused by debris blocking the speaker grille, but they can also signal a failing speaker component. Microphone issues are frequently caused by the same physical damage that caused other problems — a drop, a liquid exposure, or damage during a previous repair.

Section 2: The iPhone Repair Process at iParts — What Actually Happens

A lot of people feel uneasy handing their phone to a repair shop without knowing what happens to it. Here’s exactly what the process looks like.

In-House Diagnostic

We start with a diagnostic before anything is opened. We identify your exact iPhone model, examine the damage, test all the systems that might be affected, and tell you what we found. If you’re not sure what’s wrong — your phone is just “acting weird” — bring it in and we’ll figure it out. You’re never charged for the diagnostic itself.

You can also get an instant quote online before you visit if you already know what the issue is.

The Repair

Once you approve the repair, our technicians handle everything in-house. Screen replacements, battery swaps, charging port repairs — these are completed during your visit for most models. More complex repairs like water damage recovery or camera module replacement may take a bit longer, and we’ll always give you an honest timeline upfront.

For customers who can’t come in to our Folsom or Vacaville locations, our mail-in repair service ships both ways and handles the full range of iPhone repairs. We also serve customers from the wider Sacramento region who don’t want to travel to an Apple Store or wait for a mail-in return from Apple.

Testing Before You Leave

Every repaired iPhone is tested before it goes back in your hands. Screen repairs are tested for full touch sensitivity, display color and brightness, and Face ID function. Battery replacements are verified for correct installation and charge behavior. We want you walking out with a phone that works — not calling back the next day with a new problem.

6-Month Warranty on Parts and Labor

Every repair part at iParts and Phone Repair comes with a 6-month warranty. If a repair we performed fails within that window, we handle it at no charge. This is our commitment to standing behind our work — not just in the short term, but through the normal usage period that follows a repair.

Section 3: iPhone Repair Cost in Folsom — What Determines the Price

The cost of an iPhone repair depends on a few specific factors that are worth understanding before you come in.

Your iPhone Model

An iPhone SE screen repair and an iPhone 16 Pro Max screen repair are not the same cost. Newer OLED panels are more expensive than older LCD displays. Pro models with ProMotion displays use premium assemblies. Battery costs also vary by model — newer iPhones with smaller battery access paths take more time and labor. Always give us your exact model number — not just “iPhone” — when you request a quote.

The Type of Repair

A screen replacement is different from a battery swap, which is different from water damage recovery. Screen repair tends to be the most common and varies the most by model. Battery replacements are more consistent in price across models. Water damage is priced after diagnostic since the extent of internal damage varies significantly by how long the phone was wet and what it was exposed to.

No Appointment Needed, No Hidden Fees

You don’t need to set an appointment — just walk into our Folsom or Vacaville location during business hours. Our locations page has current hours and directions. The price you’re quoted is the price you pay. No add-ons, no surprise fees at the counter.

Corporate and Business Accounts

If you manage iPhones for a business, school, or organization, we offer corporate accounts with priority service, volume pricing, and dedicated account support. The California State Lottery has been a client since 2014 — we know how to handle enterprise device repair at scale.

Section 4: Why iParts Is the Right Choice for iPhone Repair in Folsom

There are repair options across Folsom and Sacramento. Here’s what actually separates a repair worth trusting from one that isn’t.

Ten-Plus Years of Experience in the Sacramento Area

iParts and Phone Repair has been operating in California since 2014. We’ve repaired thousands of devices across our Folsom, Vacaville, and Gresham locations. That experience shows up in how efficiently repairs are handled, how edge cases are diagnosed, and how transparently customers are treated — from the walk-in who needs a quick screen swap to the business account managing dozens of devices.

Every Device Under One Roof

We don’t just fix iPhones. iParts handles Android phone repair, iPad and tablet repair, laptop and MacBook repair, game console repair, drone repair, GoPro camera repair, and iPod repair — all at the same location. If you have multiple devices that need attention, one trip handles everything.

Mail-In Service for Remote Customers

Not close to Folsom or Vacaville? Our mail-in repair service lets you ship your device directly to us from anywhere in California, Oregon, or beyond. We repair and ship back quickly, with the same quality and warranty as in-store service.

Buy, Sell, and Track Your Repair

If repair doesn’t make sense for your specific phone’s age or condition, we also buy used and broken devices through our device buyback program. Our repair tracker lets you check the status of your repair in real time once it’s in our system. And our device shop carries certified electronics with a 6-month guarantee.

FAQs: iPhone Repair Folsom

Do I need an appointment to get my iPhone repaired at iParts? No. Walk-ins are welcome at our Folsom and Vacaville California locations and our Gresham Oregon location. Just come in during business hours and we’ll get started. Check our locations page for current hours.

Will Face ID still work after my iPhone screen is replaced? Yes, as long as the repair is done correctly. The Face ID module must be carefully transferred from the old screen assembly to the replacement. If this step is mishandled, Face ID is permanently disabled and cannot be restored by any independent shop. Our technicians handle this correctly on every repair — it’s one of the reasons choosing an experienced shop matters.

How long does a typical iPhone repair take? Screen replacements and battery swaps are typically completed the same day, often within a couple of hours. Water damage recovery takes longer depending on the extent of internal damage — we’ll give you an accurate timeline after the diagnostic. Mail-in repairs are shipped back promptly once the repair is complete.

What warranty do you offer on iPhone repairs? All repair parts come with a 6-month warranty on parts and labor. If anything related to the repair fails within that period, we handle it at no charge. Devices purchased from us come with a 6-month warranty.

Can you fix an iPhone with water damage? Yes — and the sooner you bring it in, the better. Power the phone off immediately after water exposure and do not attempt to charge it or put it in rice. Bring it to us as quickly as possible. Early treatment significantly improves recovery outcomes.

I’m not sure what’s wrong with my iPhone. Can you figure it out? Absolutely. Our in-house diagnostic is exactly for this situation. Bring it in, tell us what’s happening, and we’ll run through it and tell you what we found before recommending any repair.

This article is for general informational purposes only. For an accurate assessment of your specific iPhone and issue, visit any iParts and Phone Repair location or use our instant quote tool to get started.

The post iPhone Repair in Folsom and Sacramento: What It Costs, What to Expect, and Why iParts Gets It Right appeared first on iParts and Phone Repair.

Drone repair is more nuanced than most device repairs. A crashed drone isn’t just one broken thing — it’s potentially four or five systems that all took stress at the same time, and figuring out which ones are actually damaged versus which ones just look rough on the outside is what determines whether a repair makes sense. At iParts and Phone Repair, we’ve worked on drones from hobbyist flyers and real estate photographers to cinematographers and agricultural operators. Here’s what our technicians actually look at when a drone comes in after a crash.

Section 1: What a Crash Actually Does Inside Your Drone

Drones are complex machines. A single crash event puts stress on multiple systems simultaneously, and the visible damage — a cracked arm, a broken prop — is often the least of your problems.

The Motors

Brushless motors are the heart of a drone’s flight system. Each motor spins at thousands of RPM and is precisely balanced for stable flight. A crash can bend motor shafts, crack motor bells, damage internal bearings, or burn out motor windings if the impact caused a sudden stall while under full throttle. A motor that spins when you power up but wobbles or makes a grinding sound has almost certainly taken internal damage. Flying on a damaged motor accelerates wear on the others and can cause a secondary crash.

The Electronic Speed Controllers (ESCs)

ESCs regulate the power flow to each motor. They’re compact boards that live either inside the frame or embedded in the flight controller stack. Impact stress — especially on hard surface crashes — can crack solder joints on the ESC, pop capacitors, or physically fracture the board. A drone with an ESC fault will typically yaw uncontrollably or fail to arm at all, even if everything looks intact externally.

The Camera Gimbal

The camera gimbal is one of the most impact-sensitive components on any camera drone. It’s designed to absorb and correct for flight vibration — not for collision force. A crash can strip the small plastic gear mechanisms inside the gimbal, bend the motor mounts, or damage the ribbon cable that connects the camera to the flight controller. A gimbal that won’t level, drifts to one side, or produces shaky footage despite stable flight has almost always taken crash damage. Our drone repair service assesses gimbal function as a standard part of every post-crash diagnostic.

The Frame

Carbon fiber and plastic frames crack, split, and delaminate under impact. Carbon fiber damage is particularly deceptive — a frame can look clean on the surface while having internal fractures that compromise structural integrity. Flying a structurally compromised frame risks mid-air failure. Frame damage is usually the most visible repair need after a crash, but it’s rarely the only one.

The Battery

LiPo (lithium polymer) batteries used in most drones are extremely sensitive to physical impact. A crash can cause internal cell damage that isn’t visible externally but results in dramatically reduced flight time, thermal swelling during charge, or in serious cases — a fire risk. Any drone battery that puffed or swelled after a crash should not be recharged or used again. This is a safety issue, not just a performance one.

The Sensors and GPS Module

Modern drones rely on barometers, gyroscopes, accelerometers, and GPS for stable flight. Crash impact can knock sensors out of calibration or physically damage the GPS module. A drone that drifts uncontrollably in GPS mode, or that holds altitude poorly after a crash, may have sensor damage that doesn’t show up in a visual inspection at all.

Section 2: The Most Common Drone Repairs We See

After evaluating hundreds of crash cases, here are the repair types our technicians handle most frequently.

Motor Replacement

Single motor replacements are the most common drone repair request. A crashed motor is almost always worth replacing on a quality drone — motors are relatively inexpensive compared to the drone itself, and a single bad motor affects the entire flight system. We match replacement motors to the original specs to preserve performance balance across all four.

Propeller Replacement

Props are the most expendable component on a drone and the easiest to replace. If a crash only snapped props and the motors and frame are intact, you’re looking at the simplest and cheapest repair possible. We keep stock of common prop sizes and can have most drones ready to fly the same day on a prop-only repair.

Gimbal Repair and Calibration

Gimbal repairs range from cable replacement and gear repair to full gimbal assembly replacement. After repair, gimbal calibration is essential — a mechanically repaired gimbal that hasn’t been calibrated will still produce drifting or horizon-tilt footage. We calibrate after every gimbal service.

Water Damage Recovery

Water exposure is the most urgent drone repair situation. Salt water is especially aggressive — it corrodes circuit boards within hours. Water damage repair on drones follows the same principles as phone water damage: power the drone off immediately, do not attempt to charge it, and bring it in as quickly as possible. We disassemble, clean, and dry the internal electronics using professional methods. Recovery rate improves dramatically the sooner the drone reaches a technician.

ESC and Flight Controller Repair

Board-level repairs on ESCs and flight controllers require micro-soldering capability and familiarity with drone firmware. These are more involved repairs, but they’re often the difference between a $150 board repair and a $400+ replacement — especially on higher-end drones where the flight controller stack is a significant portion of the drone’s value.

Battery Assessment and Replacement

Any battery that shows swelling, reduced capacity, or voltage irregularity after a crash needs to be replaced. We test battery discharge curves and internal resistance to assess whether a post-crash battery is safe to continue using before recommending replacement.

Section 3: Should You Repair or Replace? Making the Smart Call

The repair-vs-replace decision on a drone comes down to three factors: the cost of repairs relative to the drone’s replacement value, the severity and spread of damage across systems, and whether the drone’s core components (flight controller, motors, ESC stack) are salvageable.

Repair almost always makes sense when: The frame and flight electronics are intact, damage is isolated to motors, props, gimbal, or battery, and the drone originally cost $300 or more. A DJI Mini or Mavic series drone with a crashed gimbal, broken prop, and a bent arm is an excellent repair candidate — the core value is the flight system and camera, which are intact.

Replace may make more sense when: The flight controller, ESC stack, and frame all took serious damage simultaneously, the drone originally cost under $150, or the repair estimate approaches 60–70% of the drone’s replacement cost. In those cases, we’ll tell you honestly rather than recommend repairs that don’t make economic sense.

Get a diagnostic first regardless. Visual inspection only tells part of the story. A drone that looks like it only needs props might have a bent motor shaft or an ESC with cracked solder joints that won’t show up until you attempt to fly again — at altitude. Our in-house diagnostic gives you the full picture before you commit to anything. You can get an instant quote online, or visit any of our California and Oregon locations for a walk-in assessment.

Not local? Our mail-in repair service handles drones from customers across the country. Drone repairs requiring special order parts typically arrive and ship back within a few days of receiving the device.

One additional note: if your drone uses an action camera like a GoPro that also took damage in the crash, our GoPro camera repair service handles that separately. Broken lenses, damaged charging ports, and water exposure are the most common GoPro repairs we see come in alongside drone cases.

Section 4: Conclusion and Final Thoughts

A crashed drone is a stressful moment — especially if you were mid-shoot or flying expensive equipment. But most crashes are survivable from a repair standpoint. Motors, props, gimbals, and even ESCs are replaceable components. The key is an accurate diagnostic before assuming the worst, and fast action in cases involving water exposure.

iParts and Phone Repair has been handling complex device repairs since 2014 — from iPhones to iPads, laptops to game consoles, and yes, drones. Our technicians approach drone repair with the same precision and accountability we bring to every device that comes through our doors. Walk in with your crash-damaged drone, tell us what happened, and we’ll tell you exactly what it needs. No guesswork, no inflated estimates.

FAQs

What drone brands do you repair? We repair DJI drones (including Mavic, Mini, Air, and Phantom series), as well as Autel, Parrot, Holy Stone, and other consumer and prosumer models. If you’re not sure whether we service your model, call ahead or bring it in.

Can a water-damaged drone be repaired? Often yes, if it’s brought in quickly. The key is powering the drone off immediately after water contact and not attempting to charge or fly it. The longer the internal components stay wet or are exposed to ionic residue, the more corrosion spreads. Same-day evaluation gives the best recovery odds.

Is it worth repairing a crashed drone? It depends on which components were damaged and the drone’s original value. Isolated damage (motors, props, gimbal, battery) on a drone worth $300 or more is almost always worth repairing. We’ll give you an honest cost assessment and let you make the call.

How long does drone repair take? Simple repairs like propeller and motor replacement can be done the same day. Gimbal repairs, board-level work, and water damage recovery typically take 1–3 days depending on part availability. If parts need to be ordered, we’ll give you an estimated timeline upfront.

Can I repair my drone myself? Simple prop replacements are straightforward. Beyond that, drone repair requires knowledge of brushless motor specs, ESC firmware, gimbal calibration software, and soldering skills for board-level work. Incorrect repairs — particularly wrong-spec motors or improper gimbal calibration — can cause additional crashes.

Do you also repair GoPro cameras that were mounted on the drone? Yes. GoPro repairs are handled through our dedicated GoPro camera repair service. Broken lens, damaged charging port, and water damage are the most common repairs. Bring both the drone and the camera in together for a combined diagnostic.

Disclaimer

This article is for informational purposes based on general drone repair experience and is not a substitute for a professional diagnostic of your specific device. Damaged LiPo batteries can pose a fire or safety risk — do not charge, puncture, or store a damaged drone battery indoors without professional evaluation. FAA regulations regarding drone registration and operation apply regardless of repair status; consult FAA.gov for current rules on drone use in your area. iParts and Phone Repair makes no guarantee of repair outcomes without first inspecting the affected device.

The post Crashed Your Drone? Here’s What Actually Breaks Inside and When It’s Worth Repairing appeared first on iParts and Phone Repair.

Before we delve into the details, remember that you have viable options for selling in the Folsom, Vacaville, and Gresham areas. One such business is iParts & Phone Repairs, known for their top-notch repair services, offering good prices for buying and selling refurbished devices, and same-day payouts to customers who want to sell their devices.

Now, let’s dive into the five key factors to consider when selling your used gadgets:

1. Understand the Value of Your Device

The first thing you need to do is find out the current value of your device. This involves researching similar used models online to get a feel for the current market price. Keep in mind that the price will largely depend on the condition of your device, its age, and the included accessories. iParts & Phone Repairs offers free evaluations, giving you an idea of your device’s worth based on fair and current market trends.

2. Choose the Right Place to Sell

Selecting the right platform to sell your device can have a huge impact on your selling experience. While online marketplaces can reach a broader audience, they often come with various fees and the hassle of shipping the device. On the other hand, physical stores can offer a more straightforward, faster process. iParts & Phone Repairs, with locations in Folsom, Vacaville, and Gresham, provide a seamless transaction process, offering you competitive prices and same-day payouts.

3. Wipe Your Device Clean

One of the most crucial steps to remember when selling your used device is to back up and wipe all your data. This includes all personal information, such as photos, emails, and documents, as well as signed-in accounts. You want to ensure that the new owner cannot access your personal information. If you’re unsure how to do this, the experts at iParts & Phone Repairs can help guide you through the process to make sure your data is securely erased.

4. Prepare Your Device for Sale

A little preparation goes a long way when selling your device. This can range from a simple cleanup to minor repairs that could potentially increase the resale value. It’s also crucial to gather any included accessories like chargers or headphones as these can increase the appeal of your device to potential buyers. The team at iParts & Phone Repairs can assist you in this process and ensure that your device is in its best possible condition before selling.

5. Be Honest About the Condition

Transparency is key when selling your used devices. Accurately describing the device’s condition helps avoid any potential disputes or dissatisfaction from the buyer’s side. iParts & Phone Repairs encourages a truthful assessment of your device’s state, which not only builds trust but also ensures a smoother transaction process.

Sell Your Device to Us

When it’s time to upgrade, remember that selling your used device doesn’t need to be a daunting task. With iParts & Phone Repairs, you can rest assured that you’re getting fair prices and quick payouts. The conscientious team there will help guide you through every step, ensuring that your selling experience is as smooth and profitable as possible. So why not visit iParts & Phone Repairs today and turn your old device into cash?

You can contact us at (800) 619-6924 or send an email to [email protected] to get started.

The post 5 Things to Consider When Selling Your Used Devices appeared first on iParts and Phone Repair.

These systems pack their components, ports, and monitors into a single unit that allows you to easily place them in your workplace. But because it’s compacted in a single unit, you can’t crack it open to fix or swap the components freely. So here are the top all-in-one desktops to help you in choosing.

1. HP Pavilion 24 All-in-One

This has a 3GHz speed six-core AMD Ryzen 5 4600H processor with 16GB RAM, 256GB SSD boot drive, and 1TB hard drive as a secondary drive. This operates with Windows 10 Home with AMD Radeon graphics displayed on a 23.8 inches screen. 

The IPS touch screen offers full HD 1920×1080 native resolution. This also has a high-resolution 5-megapixel webcam with a pop-up privacy design and a quad-array digital microphone that’s already great for videoconferencing and online chat. HP Pavilion 24 all-in-one desktop already gives a potent performance for as low as $799.99 in direct-to-customer configuration.

It has a plain rectangular base and slim stand support with tilt but no height adjustment. This 14.8-pound computer doesn’t swivel but it’s not difficult to move. 

The desktop has a headphone jack and one USB Type-A port on the right edge of the display; the power button is at the bottom left; three more USB-A ports and one Type-C port at the rear; along with an SD slot; a Gigabit Ethernet jack; HDMI-out port to connect a second display; HDMI-in to connect a cable box or game console to the screen. 

The USB ports follow the USB 3.1Gbps spec. This Pavilion 24 has Bluetooth and 802.11ac Wi-Fi to handle wireless communications and a laptop-style 120-watt power brick plugs into the rear. The Pavilion comes with a color-coordinated white keyboard and a mouse that takes two of the rear USB ports.

2. Asus M241 

Asus M241 has a 2.6GHz speed AMD Ryzen 3 3250U CPU with 8GB RAM, and 256GB SSD boot drive. This operates with Windows 10 Home with AMD Radeon Vega 3 graphics displaying on a 23.8 inches screen. 

The non-touchscreen offers full HD 1920×1080 native resolution.

This features a metal, L-shaped stand that looks familiar to the iMac’s base. M241’s speaker bar is 0.9 inches thick; the base and speaker bar are muted gold in color. The display is bordered by 0.2-inch thick bezels that give a sleek look. All but two of its ports are placed in a row in the center of the back panel.

3. Apple iMac 24-Inch

This has an Apple M1 processor with 16GB RAM, and a 512GB SSD boot drive. This operates with MacOS Big Sur with Apple M1 graphics. This non-touchscreen type desktop has a 23.5 inches screen size of 0.44 inches thick with 4480×2520 native resolution. 

This all-in-one PC is available in seven tones. The Magic Mouse, the Magic Keyboard, and Magic Trackpad (optional) have color-matched aluminum sides and surfaces. The iMac’s power cord and the USB-C-to-Lighting cable used to charge the wireless peripherals are made of woven and color-matched material. The stand offers tilt but not height adjustment. The power adapter is upgradeable with a gigabit Ethernet port built-in.

4. HP Envy 34 All-in-One 

This has an Intel Core i7-11700 processor with 2.5GHz speed. This has a storage amount of 32GB RAM, and a 1TB SSD boot drive. This operates with Windows 11 Pro with Nvidia GeForce RTX 3060 Laptop GPU graphics. This 34 inches non-touchscreen desktop has a 5120×2160 native resolution with an aspect ratio of 21:9. HP’s latest update of the Envy 34 which starts at $1,999.99 to $2,709.99 is one of the best AIOs.

It got a 5k display, a movable camera, and a snappy performance. It has a different USB webcam design. It’s magnetically detachable that allows moving at any edge of the system and also has above average camera quality of 16MP sensor. 

The connectivity option is more than the most. The system has more ports than many AIO offers. Most are located at the back of the monitor that includes four USB 3.0 ports, two USB Type-C ports with Thunderbolt 4 support, an HDMI connection, and an Ethernet jack. There are additional ports on the right-hand side of the stand that hold two more USB 3.0 ports, a USB-C connection, and an SD card slot. Envy 34 also comes with a basic Bluetooth mouse and keyboard.

5. Apple iMac 27-Inch

Apple iMac 27-inch ($1,799) has a 3.6GHz speed 10-core Intel Core i9-10910 brain. This has a storage amount of 32GB RAM, and a 1TB SSD boot drive. This 27 inches wide non-touchscreen desktop has a 5120×2880 native resolution with a vastly better 1080p camera. This operates with Apple macOS Catalina with AMD Radeon Pro 5700 XT graphics. 

This iMac weighs 19.7 pounds and measures 20.3 inches in height, 25.6 inches in width, and 8 inches in dimension. This system includes four USB 3.0 Type-A ports, two oval-shaped USB Type-C ports with Thunderbolt 3 support, an Ethernet jack, a full-size SD card slot, a headphone jack, and a port for power adapter. The Ethernet port is now upgradeable to 10Gbps.

6. HP Chromebase All-in-One 22

HP Chromebase has an Intel Pentium Gold 6405U processor with a 2.4GHz speed. This has a storage amount of 4GB RAM, and a 64GB eMCC Flash Memory boot drive. This operates with Google Chrome OS with Intel UHD Graphics. 

This 21.5 inches touch screen type has 1920×1080 native resolution and a modest 250-nit maximum brightness rating with a 5-megapixel webcam. This all-in-one desktop is different from others with a display that can rotate in landscape and portrait modes. This has a 6.7 inches in diameter cone-shaped base that doubles as a speaker. 

There are no height adjustments. The ports are located at the back of the base having the power button on the top, and a quartet of USB ports (Type-A and Type-C and USB-C ports) variety. This $479.99 desktop already includes a wireless keyboard and mouse.

The post 6 of 2022’s Top All-in-One PCs appeared first on iParts and Phone Repair.

1. Apple Notes

This is the best note-taking app for iPhone users. Remember everything and tackle any project with your list, notes, tasks, and schedule all in one app. When you put your notes here, it automatically syncs to all your devices. This helps you work anywhere because it keeps important info handy.  You can also add text, images, audio, scans, PDFs, maps, and documents that make your note more useful. Make your tasks easier to do with your notes with checklists and tap check-off items as you go. 

This app has powerful and flexible searching capabilities that help you to get what you need in a matter of seconds. You can also scan documents to make them handier and save web pages and mark them with arrows, highlights, and texts to make them more useful. Apple Note can secure notes containing sensitive or personal data with a password, keep your notes in folders and subfolders then sort them as you prefer, and create Custom Smart Folders based on one or more tags. You can share and collaborate on entire shared folders, mention friends to alert them to important updates and direct them to a shared note and view the edit times and dates for the note with highlighted text color-coded to match the collaborators who were involved in the creation of the note. Quick Notes can be created on compatible iPad and Mac systems and viewed and edited on iPhone.

2. Outlook

It has impressive utility and power features, making it the ideal alternative to the more popular Gmail. Outlook helps you protect and keep your inbox clutter-free working around the clock. You can add popular services like Dropbox, Trello, Grammarly, and more, making it an ideal way to keep your workflow in one place.

It also has a To-Do feature that was formerly called Wunderlist. It also has an Immersive Reading Mode that filters images and quotes out of your email to present it as a clear document and complete with text-to-voice capabilities. Collaboration is easy with Word, PowerPoint, and Excel. With Skype, you can chat in real-time, right from your inbox. It has a built-in Calendar to keep you on track with your tasks. Outlook allows Two-factor authentication and email encryption for security. Outlook is easy to use since it’s designed to be more accessible to everyone with intuitive voice-control navigation, and support for multiple assistive devices. 

3. 2Do

2Do was designed to meet your speed needs. You can quickly enter your thoughts and ideas before forgetting. You can enter multiple tasks in seconds with Quick Add on iOS. Quick Entry on Mac, on the other hand, is a comprehensive task editor that can be accessed anywhere, anytime, even when 2Do is not running. It’s simplistic appearance but it houses an incredible productivity-aware engine that can be as fierce as your workflow. It offers the perfect mix of a rich feature set and ease of use. From a full set of sorting filters, focus, tags, location, and date range, it will surprise you in every way with the amount of thoughtfulness and attention to detail that went into developing it. 2Do gives you complete control over all your workflows giving you the freedom to organize your lists, categorize, and sort them. Your notes can sync into iCloud, Dropbox, and Toodledo.

4. Apple Calendar

Apple Calendar is a user-friendly app installed on all MacBooks, iPhones, iPads, and Apple Watches in several versions of macOS and iOS. Your account syncs across desktop and iPhone so you can manage your schedule wherever you are. It’s knowledgeable to use and has all the features you’d expect from a web-based calendar, including the ability to create multiple calendars and customize the view of each calendar so you can see your schedule by day, week, and month.

5. Streaks

This is a great habit-tracking app for iPhone. This has two excellent features that set it apart from the other habit-tracker apps. It integrates very well with Apple’s ecosystem including Mac and Apple Watch and can be seamlessly integrated with Apple’s Health app, and its robust charts and graphics give you a more detailed interpretation of habit-tracking. You can choose or create up to twelve tasks. Streaks can automatically track certain goals with the iOS Health app. You can set how many times in a day per week, in a month, or every day. This app lets you quickly see which tasks are remaining for the day, and what’s in progress, and marked as complete. You can view your task statistics to keep you motivated.

The post 5 Best Productivity Apps for iPhone Users appeared first on iParts and Phone Repair.

Razer Blade 15

Razer Blade 15 got even better with a new top-level Razer Blade 15 Advance Model. This beastly performing gaming laptop is now compact with the latest 12th Gen Intel Core i9 processor (14-core) and NVIDIA with graphics up to GeForce RTX 30 Series laptop GPUs, previously with 6-Core Intel Core i7 with graphics of GeForce RTX 3070 laptop GPU, giving you the most impressive gaming laptop graphics ever. 

Razer Blade 15 has an amazing display with Full HD 360Hz, QHD 240Hz (G-SYNC), or the new 4K with UHD 144Hz display. The already high-end former model that performs with Windows 10 Home is free to upgrade to operate with Windows 11 Home.

You can enjoy an unbeatable performance loaded in the thinnest 15” RTX gaming laptop chassis ever. It has spectacular specs loaded with a large amount of storage space of 1TB PCle and an extra M.2 PCle slot, memory of 16GB to 36GB RAM (DDR5 4800MHz), a vapor chamber cooling system, and a per-key RGB keyboard. This top-notch gaming laptop that is thinner from 0.78” / 19.9 mm to 0.67” / 16.99 mm also has an SD card reader port.

The latest Razer welcomes some other improvements. The keycaps are larger. Though it’s not that noticeable, it makes it easier to touch so that you can type quickly. 

The power button has been replaced by a less meticulous full-size key in the top right corner of the keyboard. It looks cleaner and more sensible. The new speakers also got sleeker. Razer’s touchpad remains one of the best in any Windows laptop with its smooth panning delivery, responsive presses, and high-quality feel. Last year’s model upgraded the webcam to 1080p, so you’ll get a better video call experience. 

This Razer Blade 15 Advanced model is still the most excessive among gaming laptops with a base configuration price of $2,499.99, but its CPU and GPU bring an incredible on-edge gaming experience with a high-quality portable design. It is also available on Amazon, Best Buy, B&H, and Newegg.

Asus ROG Zephyrus G14 GA402 2022

Asus has released its new ROG Zephyrus G14 GA402 with various models yet nearly similar to each other. These are consisting of RJ-L8106W, RJ-L8147W, RJ-L8146W, RJ-L8145W, RK-L8135W, RK-L8134W, RK-L8133W, and RK-L8132W.

ROG Zephyrus G14 GA402 operates with Windows 11 Home runs with AMD Ryzen 9 6900HS Mobile Processor (8-core/16-thread, 16MB cache, 4.9GHz max boost). All of the models have 8GB GDDR6 but the RJ models’ graphics have AMD Radeon RX 6700S ROG boost up to 100W(SmartShift), while the RK models have AMD Radeon RX 6800 ROG boost up to 105W(SmartShift). It has a $1,649 configuration for RX 6700 and $2,499 for RX 6800. 

All of its displays are the same as the ROG Nebula display, QHD+ 16:10 (2560 x 1600, WQXGA), an anti-glare display, a refresh rate of 120Hz, a response time of 3ms, and supports Dolby Vision HDR.

Its memory is available in either 8GB DDR5 or 16GB DDR5 on the board, 8GB DDR5 or 16GB DDR5 SO-DIMM, with a maximum capacity of either 24GB or 32GB, and can support dual-channel memory. This gaming laptop has a large storage space of 1TB PCle 4.0 NVMe M.2 SSD, all I/O ports that are needed are available, backlit chiclet keyboard 1-Zone RGB touchpad, and 720 HD IR camera for Windows Hello. 

Its audio has some wonderful specs like a 4-speaker system with Smart Amplifier, a built-in 3-microphone array, and AI noise-canceling technology. You can have a great experience in its network and communication with Wi-Fi 6E(802.11ax) (Dual-band) plus Bluetooth 5.2 (may vary with OS upgrades). Its battery has 76WHrs, 4S1P, and 4-cell Li-ion. Can have AniMe Matrix that’s adding a customizable, dynamic LED grid to the laptop’s lid. It weighs from 1.65 Kg (3.64 lbs) to 1.75 Kg (3.79 lbs) with different dimensions too.

Razer Blade 14 AMD Ryzen 5900HX

This Razer Blade 14 costs as much as $2,599.99. Pretty expensive, right? But it can also perform expensively. This device processor is AMD Ryzen 9 5900HX with 8 Cores / 16 Threads, a 3.3GHz base, and a 4.6GHz maximum boost. 

Updating its Windows is free if available. It has a display of 14-inch QHD 165Hz, 2560 x 1440, a graphics of NVIDIA GeForce RTX 3080 (8GB VRAM). Amazing graphic features like NVIDIA® GeForce RTX™ 3080 Laptop GPU, 8GB GDDR6 VRAM, NVIDIA CUDA® Cores – 6144, Maximum Graphics Power up to 100W, Boost Clock up to 1365MHz, NVIDIA GPU Boost™ 2.0, NVIDIA Optimus™ Technology, NVIDIA Whisper Mode 2.0, NVIDIA Resizable BAR, 2nd Gen Ray Tracing Cores, 3rd Gen Tensor Cores, and VR ready.

It has a storage of 1TB SSD, a memory of 16GB DDR4-3200MHz (fixed on the board), Wi-Fi 6E (802.11ax) and 5.2 Bluetooth connectivity, and a per-key RGB keyboard, Microsoft Precision Glass touchpad.  It also has amazing audio of built-in stereo speakers and a 3.5mm headphones/microphone combo port.

It’s finished with CNC Aluminum, anodized black, and a backlit green Razer logo with the dimensions of 16.8mm x 220mm x 319.7mm that weighs 1.78 Kg (3.92lbs). It is amazing to have powerful hardware with such slimness like a pro. 1.78 Kg may be heavy, but for an NVIDIA RTX 3080? This is just impressive.

The post Top 3 Gaming Laptops of 2022 appeared first on iParts and Phone Repair.

1. Prime Cables Lightning to HDMI Digital AV Adapter

The Lightning Digital AV Adapter supports mirroring of whatever is displayed on the device screen. This includes apps, presentations, websites, slideshows, and more. This adapter can be used with iPhone, iPad, or iPod with a Lightning connector. This AV adapter can connect to HDMI-equipped TV, display, projector, or other compatible monitors in up to 1080p HD. This can enhance the versatility of entertainment systems or presentations. This HDMI adapter is fast and easy to use. This Lightning to HDMI adapter can connect to most HDMI displays that broaden the use of the devices. The displaying photos, videos or other presentations from the iPhone can already be shared with family, friends, students, and others. This Apple Lightning Digital AV Adapter made browsing on larger screens easier and better. 

2. Apple AirTag

AirTags are used to help track important stuff such as keys, bags, wallets, purses, devices, and others. This lessens the possibility of losing things. This keeps things on the owner’s radar. This uses the Find My app which can also track Apple devices. This cute keychain-looking Apple AirTag can play sounds on the built-in speaker via the new Items tab in the Find My app. It has Bluetooth proximity finding, Apple designed U1 chip for Ultra-Wideband and Precision Finding that uses an accelerometer sensor and NFC tap for Lost Mode. This can lead straight to the lost item; it displays the distance to the AirTag and the direction to head in. The Precision Finding is compatible with iPhone 11/Pro/ProMax, iPhone 12/mini/Pro/Pro Max, and iPhone 13/mini/Pro/Pro Max.

The tag efficiently sends out a secure Bluetooth signal to nearby devices in the Find My Network. The location of the AirTag signal is sent to the iCloud; then to the Find My app and can be viewed on a map. The process is encrypted and anonymous to protect privacy. When Lost Mode is turned on and detected by other devices in the network, this automatically sends a notification. The contact info of the owner can be gotten by the NFC tap. AirTag is still designed to discourage unwanted tracking. Only the owner can see where his AirTag is. The location data and history are never stored on the tag itself. The devices that relay the location of the owner’s AirTag also stay anonymous.

Its battery life is designed with a user-replaceable CR2032 coin cell battery that can last more than a year, and iPhone gives a notification when it’s time to be replaced. The 31.9 mm x 8 mm tag that weighs lightly as 11g is also Rated IP67 resistant to splash, water, and dust. That is a maximum depth of 1 meter up to 30 meters under IEC standard 60529 that should have an operating ambient temperature of -20 ℃ to 60 ℃.

3. Otterbox Amplify Glass Glare Guard

The Amplify Glare Guard is a Corning Aluminosilicate glass screen protector that is available for iPhones 11/Pro Max, iPhone 13/Pro/mini/Pro Max, and iPhone XR. The anti-glare screen protector defends screens against drops, scratches, and scrapes up to 5x greater resistance than leading glass alternatives while giving improved display readability from low to extreme lighting. The 0.04 lbs glass protector also boasts a lowered screen-brightness setting that enables extended daily battery life. This comes with an installation frame, cleaning wipe, drying cloth, and dust removal sticker.

4. Master & Dynamic MC100 Wireless Charge Pad

The Master & Dynamic MC100 Wireless charge pad is built to complement the MW08 Sport True Wireless Earphones that can be used with the iPhone. It is a beautifully engineered wireless charger having a low-profile look that is available in colors silver aluminum with grey coated canvas and gunmetal aluminum with black coated canvas. This charging disk measures 100mm by 100mm and is 9.9mm thick and weighs 90.7g. This gives 10 Watts of maximum output with an input of 5v/1.2~1.5A, 9V/1.2~1.5A.

The charging pad does not include an AC wall adapter. It has a LED indicator on the front of the charger which looks like a round drink coaster. It illuminates when a device is charging without being too bright. The bottom side of the Master & Dynamic MC100 Wireless Charge Pad is made from machined aluminum and has four anti-skid rubber feet to keep the MC100 from sliding around. Master & Dynamic claims that this charging pad can charge the MW08 Sport to 50% in just 30 minutes and a full charge from empty will take up to 100 minutes.

The post Top 4 iPhone accessories for 2022 appeared first on iParts and Phone Repair.

We’ll break this guide down into four categories:

• Body
• Display
• Platform
• Camera
• Price

You can skip through the categories you care most about to help yourself decide faster! But if you’re like us who like getting down to the nitty-gritty of gadgets we plan to spend our money on, read through our buying guide.

Body

iPhone 13: The iPhone 13 weighs 174 grams and is measured at 5.78 x 2.81 x 0.30 in. The front and back of its aluminum frame are powered by Gorilla Glass, which can be found on most smartphones today. The iPhone 13 is also IP68-rated dust- and water-resistant, and you can swim up to 6 meters deep for 30 mins with your iPhone 13 if you’re into that!

Samsung Galaxy S22 5G: On the other side of the ring, the Samsung Galaxy S22 5G weighs 167 grams and is measured at 5.75 x 2.78 x 0.30 in. Similar to the iPhone 13, it has an aluminum frame with Gorilla Glass Victus+ front and back. Based on Samsung’s ads, the Galaxy S22 5G has an armor aluminum frame with tougher drop and scratch resistance. Moreover, this model is IP68 rated dust- and water-resistant.

Display

iPhone 13: The iPhone 13 has a 6.1-inch Super Retina XDR OLED panel with HDR10, and Dolby Vision support. Its display panel has a peak brightness of 1200 nits. As for display resolution, you get 1170 x 2532 image clarity, protected by a scratch-resistant ceramic glass with an oleophobic coating, wide color gamut, and Apple’s True Tone.

Samsung Galaxy S22 5G: Not straying far, the Samsung Galaxy S22 also has a 6.1-inch size display, but with Dynamic AMOLED 2X, 120Hz refresh rate, HDR10+, and a peak brightness of 1300 nits. However, display clarity is where iPhone 13 wins over the Samsung Galaxy S22 5G, since the Galaxy S22 5G only has a 1080 x 2340 panel. Wondering what protects the Galaxy S22 5G’s display? It’s Corning Gorilla Glass Victus+ and the panel has an Always-on Display feature. Perfect for those who don’t like tapping their phones to check the time!

Platform

iPhone 13: The iPhone 13 runs iOS 15 out of the box, and is upgradable to the latest version of the iOS 15. It runs on Apple’s A15 Bionic chip which has six CPU cores with a 4-core Apple GPU. Storage-wise, the iPhone 13 is upgradeable up to 512 GB.

Samsung Galaxy S22 5G: The Samsung Galaxy S22 5G is shipped out running Android 12 and is powered by Qualcomm SM8450 Snapdragon 8 Gen 1. Its CPU has eight cores and its graphics processor is Adreno 730, a brand you often see on Samsung smartphones. When it comes to storage, the Samsung Galaxy S22 5G is only up to 256 GB.

Camera

iPhone 13: Apple’s iPhone 13 has a dual-lens rear camera setup with the first lens being wide with 13 MP. The second lens is also 12 MP, but is ultrawide. Both lenses have their own LED dual-tone flashes and HDR photo and panorama. The highest video capture quality you can get from the iPhone 13 is 4K@60fps with Dolby Vision HDR support.

The front camera of the iPhone 13 has a single-lens setup, with 12 MP wide lens that is SL 3D supported. It has HDR and can take up to 4K@60fps videos.

Samsung Galaxy S22 5G: Samsung’s contender for this buying guide has a triple-lens rear camera setup. The main is a wide lens that has 50 MP, the second is a telephoto lens that has 10 MP with 3x optical zoom, and the third lens is ultrawide and has 12 MP with Super Steady video. The rear camera setup has a LED flash, auto-HDR, and panorama. Samsung Galaxy S22 5G’s rear camera can take up to 8K@24fps videos with HDR10+ support.

Its front camera is a 10 MP wide lens with Dual Pixel PDAF, auto-HDR, and can take up to 4K@60fps videos.

Price

iPhone 13: Starts at $799 for the 128 GB model. It comes in Starlight, Midnight, Blue, Pink, Red, and Green.

Samsung Galaxy S22 5G: Starts at $699.99 for the 128 GB with 8 GB RAM model. The Samsung Galaxy S22 5G comes in Phantom Black, White, Pink Gold, Green, Graphite, Sky Blue, Violet, and Cream.

What made you decide?

Was it the camera? The body? Or the price? We know there are many factors in play, but for most people, the price is one of the biggest deciding factors. But if you’re a tech whiz who likes comparing every feature of the gadgets you’re planning to purchase, we hope this buying guide helped you pick the right smartphone for you!

If you need expert assistance when it comes to picking your new smartphone, please don’t hesitate to reach out to us and we’ll be happy to answer all your tech questions! Our friendly staff are available and will lead you to the smartphone that will serve your tech needs.

The post iPhone 13 vs. Samsung Galaxy S22: Which One Should You Get? appeared first on iParts and Phone Repair.

Since we can watch movies (even the newest ones) without going out of the house because of streaming services, it’s hard to imagine a weekend without them. So if you’re surfing the web looking for a new streaming service or another one to add to your list, you’re in the right place.

We jotted down the best streaming services for 2022 that we recommend:

1. Netflix

Netflix is known to have an impressive library of original movies, TV series, documentaries, and other types of consumable video content on its subscription-based platform. It’s probably the hottest streaming service right now because of its library alone and how accessible it is.

Outside of its original library, Netflix hosts classic movies and TV series people love to watch over and over, such as Friends, How I Met Your Mother, and other American series. It’s also home to an extensive list of hit series from South Korea and Japan.

When it comes to accessibility, you can count on Netflix to be available on any streaming device. You can use it on your smartphone, computer, Apple TV, smart TVs, and its library also supports streaming in 4K, HDR, and Dolby Atmos – for a price.

1. Amazon Prime Video

Amazon Prime can be bundled with a Prime Video subscription or as a standalone subscription Like Netflix, Amazon Prime Video has its own library of original movies and series. You can subscribe to Amazon Prime and have Prime Video bundled with it, or only pay for a Prime Video subscription to access its library of video content.

There are tons of international films, 4K HDR support, and rental feature. Since Prime Video has a set of exclusive titles, you have to pay extra to watch them on your streaming device. In addition, there are also channels you can watch using your Prime Video subscription, such as Paramount Plus and AMC Plus, among others.

1. HBO Max

HBO Max offers users an extensive library of iconic films and latest movie releases. You can subscribe to HBO Max ad-free or ad-supported, depending on your viewing preference.

Its library is constantly updated with the latest films from Warner Bros., new releases 45 days after their theatrical release, and a collection of content from classics such as Sesame Street, Adult Swim, etc.

However, despite its impressive library, it can’t stream in 4K HDR quality like Netflix and Amazon Prime Video. You’re limited to watching your favorites in 1080p, which isn’t all too bad if your display isn’t big or you stream on your smartphone.

1. Disney Plus

Streaming service Disney Plus is home to Marvel and Star Wars films. So if you’re a fan of both franchises, a Disney Plus subscription is highly recommended to ensure you get all the movies you need for binge-watching.

You can get Disney Plus as a standalone subscription or with ESPN+ and streaming service Hulu.

Aside from Marvel and Star Wars films in one place, you also get access to Disney’s classic movies! However, this may mean the content leans more towards general audiences. It’s excellent for family movie times, but not if you’re into mature titles.

As for stream quality, Disney Plus can stream 4K HDR to support high-resolution displays for the best viewing experience.

Final thoughts

When looking for streaming services, you should consider what titles you want to watch and check if specific providers have them in their libraries. Even though monthly subscriptions aren’t expensive, you can spend those dollars on better streaming services that actually have what you want to watch.

The post The Best Streaming Services for 2022 appeared first on iParts and Phone Repair.

Another feature that takes advantage of Apple’s excellent cross-device integration is Universal Control. This feature lessens the time you take switching between your Apple devices. For example, you’re working on your MacBook, and you need a file from your iPad. You can simply drag and drop the file you need using your MacBook’s trackpad to navigate your iPad. What’s better is that Universal Control isn’t limited to two devices, but three.

With notable features making Apple gadgets easier to use, it’s time you find additional devices and accessories that’ll complete your Apple ecosystem. Here are five products we recommend:

1. 16-inch M1 Max MacBook Pro

The M1 Max is currently Apple’s most powerful processor, with 10-cores of CPU power and a GPU with up to 32-cores. The beefy Apple silicon is made even more powerful by 64GB of unified memory, making it a good MacBook for heavy video rendering and software development tasks.

The 16-inch MacBook Pro is built to be compatible with Apple’s latest integration feature, Universal Control, so that you can work between your other compatible devices without a problem.

2. iPad Pro 12.9-inch

Apple’s latest addition to their iPad Pro line are the 11- and 12.9-inch iPad Pro. Both come with up to 2TB of storage but differ in size, display quality, and battery capacity.

The iPad Pro 12.9-inch is powered by Apple’s M1 chip, which you’ll also find in their latest generation of MacBook Airs. The M1 chip has an 8-core CPU with 4 performance cores and 4 efficiency cores. In addition, it has an 8-core GPU with up to 16GB of RAM.

The 12-9-inch iPad Pro is fully compatible with Universal Control, so you can conveniently include it in your productivity arsenal and have no issues transferring what you need.

3. iPhone 13 Pro Max

The iPhone 13 Pro Max is Apple’s fastest iPhone, with the A15 Bionic chip and the Pro camera system with Telephoto, Wide, and Ultra Wide modes. It’s also 5G capable, making it fast enough to connect to the internet and support your online tasks without an issue.

The iPhone 13 Pro Max is fully compatible with Universal Control, so working alongside your iPad and MacBook is made extremely convenient.

Lastly, it’s compatible with Apple’s MagSafe accessories, making charging up this smartphone a hassle-free experience.

4. Apple Watch Series 7

The Apple Watch Series 7 currently has the biggest display out of all Apple Watch models released in the previous years. This made it an even more competent smartwatch because users who aren’t fans of smaller displays benefit from its upgraded viewable area.

The retina display also has an always-on feature, so you don’t have to repeatedly tap on your watch to see the screen.

5. MagSafe Duo Charger

As Apple continues to develop MagSafe-supported devices, the MagSafe Duo Charger becomes even more relevant. It allows you to conveniently charge your compatible iPhone, Apple Watch, AirPods, and other Qi-certified devices without the trouble of plugging into a charging port.

With the MagSafe Duo Charger, you can just lay your device on top, and you’ll get the juice you need for your devices.

The post Top 5 Apple Gadgets and Accessories to Get In 2022 appeared first on iParts and Phone Repair.

The Apple iPad Pro line is Apple’s best line of iPads to date. The first iPad was already impressive when it came out in 2010, taking the world by storm. Apple has outdone itself over the years, coming out with new iPads that make consumers jump in line to purchase the new, revolutionary features. 

However, each new feature has its issues and the iPad Pro is no different. While yes, it’s a highly capable device that can function like a small computer for basic computing tasks, it has its imperfections. We’re making it our duty to help you speed past the common issues you might encounter with your Apple iPad Pro.

1. The iPad Pro Shuts Down by Itself

Your Apple iPad Pro shutting down without you doing anything to cause it to happen could be a result of a few different issues. It could be because the iPad is running too hot and is trying to save itself from damage by taking a break and shutting down. Your battery could also need replacing or it could be due to other iOS update bugs. 

How to Fix It

Solution 1: If you run demanding applications for long periods of time, it’d be good if you can work somewhere that’s cold to help your iPad Pro regulate its own temperature without shutting down. This doesn’t mean you need to set the thermostat to 50 degrees Fahrenheit, just make sure your iPad is not sitting in direct sunlight for too long.

While the iPad Pro is capable of running demanding applications when compared to other iPads such as iPad Mini, Air, and iPad, it’s still not engineered to run heavy-load computing applications for long periods.

Solution 2: Get your battery checked. The most probable cause of any battery-powered gadget shutting down by itself is a faulty battery. Fortunately, it’s not difficult to get Apple to replace your battery for a fee or without charge if your iPad Pro is under warranty. You can also contact your local repair shop to let them check your battery for signs of deterioration and have them replace it for you.

Solution 3: Keep your iPadOS up to date. Apple keeps an eye on common software issues and regularly sends software updates for customers. Make sure your iPad is up-to-date, running the newest software and you should have fewer difficulties. If the problem persists, you’ll have to reach out to Apple’s support lines to get personal assistance.

2. Your iPad Pro Can’t Connect to Wi-Fi Networks

If your iPad Pro can’t connect to Wi-Fi networks at home, in your office, or at co-working spaces, the problem may be with the device itself and not different routers. If you find yourself having trouble connecting to Wi-Fi networks anywhere you go, it’s a sign to get your device checked by Apple or your local iPad repair service provider.

Get It Fixed

Going to the experts is the best solution, especially if your Wi-Fi settings aren’t grayed out and can detect networks you can’t connect to. This can mean the issue lies with the iPad Pro’s components, and getting it checked out by professionals would definitely answer your most pressing Wi-Fi questions.

3. The iPad Pro Is Not Charging

Do you find yourself plugging your lightning cable in and out before you hear the distinctive Apple charging sound? Or does your iPad Pro take ages to get fully charged? These two things can be the effect of many issues with both your iPad Pro and charger.

The Fix

Solution 1: The first step in any troubleshooting is isolating the problem. First, try to use different chargers on your iPad Pro. If it does not work, it’s your iPad Pro that has an issue. If you’ve tried multiple chargers and they work, it’s the cable you usually charge with.

Solution 2: Your battery is dying. Literally. The only way to fix a dying battery is to get it replaced with a fresh one. If your iPad Pro is still under warranty, you can get your battery replaced for less at Apple. If not, it might be cheaper to get your local iPad repair shop to replace your battery.

Final Thoughts

Alas, you’ve reached the end of our short but insightful guide. We hope this helped you and that you can now identify any issues with your iPad Pro. Remember that while DIY projects are fun, it’s best to take your iPad Pro to your local repair shop and have the experts fix the issue.

The post Top 3 iPad Pro Issues and How to Fix Them appeared first on iParts and Phone Repair.

Brands have been in this game for so long, that they already know what we want and need.

If you’re in the market for your next computer, the holiday season is the perfect time to score the best deals on your next machine. Holiday shopping isn’t all about small gifts now — it’s about time we treat ourselves (or our loved ones) to a new shiny gadget.

Don’t worry, we’re not going to bombard you with sponsored brands and models of computers that came out this year. In this article, we’ll list the best computers based on what type of user you are. A gamer, a casual user, or a professional? We have a computer recommendation for you.

Ready to score your next computer? Read below and take your pick:

• MacBook Air

The first one in Apple’s line of computers to run without Intel, the MacBook Air M1 hits the sweet spot from every possible angle. From its known portability because of how light it is compared to the MacBook Pro and non-Apple computers, it’s also one of Apple’s most popular laptop models.

Compared to other Macs, the Macbook Air is not expensive. It’s light, has many features, and is easy to use. You’ll see students use MacBook Airs often because they can take it anywhere without breaking their backs and banks.

Of course, we know you’d love to know the techy stuff about the Air M1. Click here for all the technical specifications you could want.

Looking to buy the MacBook Air M1? Weigh your needs first. What will you be using it for? Do you do photo and video editing often, are you planning to use it for gaming? 

If you answered those two questions with a yes, then you’re better off with a MacBook Pro or a Windows gaming laptop since both can better handle those tasks. 

• ASUS ROG Zephyrus G15

Interested in a computer for gaming? Let’s look at the computer that’s best capable of running the latest titles. 

A good example of a modern title is Ubisoft’s action-adventure first-person shooter, Far Cry 6. It’s a hardware-demanding game and, as a gamer, I know you’d want nothing but the smoothest gaming experience. Especially with a title that’s as immersive as Far Cry 6.

That’s why ASUS’ ROG Zephyrus G15 would be the perfect computer option for you.

Its base model is powered by the RTX 3050 GPU (exclusive to laptops) with the Ryzen 9 5900HS the processor. 

With a base processing speed of 3.1 GHz, you’ll have enough juice to launch your games faster and keep up with fast-paced titles like Riot Games’ first-person shooter Valorant.

Of course, a beefy GPU and a fast processor are nothing without a top-of-the-line display panel. With the Zephyrus G15, you get a 15.6-inch 1440p display. 

If you play a lot of first-person games, you’ll be satisfied with the display’s 165Hz refresh rate and 3ms response time.

Worried about colors and sync? The display panel is IPS and AMD FreeSync-enabled. No dead colors and screen-tearing. Only the best gaming experience possible.

Is this laptop only for gaming? No, it can be used for a wide variety of tasks.

It’s powerful enough to run hardware-demanding software used in photo and video editing, so you can’t go wrong with the Zephyrus G15.

• MacBook Pro

Are we talking high-end photo and video editing? We can’t forget 2021’s MacBook Pro.

Apple’s October event introduced the remodeled MacBook Pro. The 2021 line added the 13-inch Pros to the MacBooks family. 

The base model, MacBook Pro 13”, still has the M1 chip from the Air M1. The processor revamps start when you look at the 14” and 16” models. They’re powered by the upgraded M1 Pro and M1 Max chips, which sports up to 10 cores of processing power.

When it comes to graphics, the new Apple chips boast up to 32 cores of display processing.

Since storage is a big factor for photo and video editors, we’d like to highlight that the maximum configurable storage for these new MacBook Pros goes up to 8TB. Depending on the usual size of your work, this might be enough. If not, an external storage drive is always an option.

Despite the upgrades on hardware, the new MacBook Pros remain light. The base model weighs 1.4kg. The heaviest is the 16” model, which weighs 2.1kg.

• Dell XPS 13 2-in-1

If there’s anything I’ve learned in technology, it’s that brands will find a way to combine things that make consumers happy.

Remember when tablets became popular? Today some of them are powerful enough to function like computers, but not so much that they can replace computers.

That’s how 2-in-1s came to be. Just a few years back we couldn’t imagine folding a laptop backwards without breaking it. Today, laptop screens can be rotated 180 degrees.

If you’re into the quirky features 2-in-1s have, Dell XPS 13 2-in-1 is a great pick. It’s powered by an 11th Generation Intel Core i5 CPU and an Intel Iris Xe GPU. The processor is good enough to handle day-to-day office tasks and browsing, but when you want to play modern titles using this 2-in-1, you won’t have an ideal gaming experience.

When it comes to the XPS 13’s display, you get a 13.4-inch touch panel. Unlike traditional laptops, its display can be used in a variety of ways. Turn and spin (carefully) to your comfort and you can rely on it to keep working when you do so.

Storage-wise, it has a PCIe NVMe SSD. SSDs are known to be faster than HDDs by a mile. And being in a PCIe lane with NVMe further shoots this convertible laptop’s storage speed ahead of HDDs.

Weight is a big factor for laptop fans. To guide you, this one weighs 1.32kg. A pretty common weight for modern Windows laptops.

Takeaways

Depending on what you want a laptop for, you’ll be better off with a MacBook or a Dell laptop. It all really depends on what you’re planning to use the laptop for. 

If you’re not the best when it comes to computers, sales representatives at computer stores will be more than glad to assist you with finding the best computer for you. 

Just tell them what you intend to use the computer you’re looking for and they’ll be ready with suggestions.

Whatever your choice ends up being, we wish you happy holiday shopping!

The post Holiday Shopping: Computer Edition appeared first on iParts and Phone Repair.

Live Streaming has become so popular that almost every social media platform out there allows users to stream content live.

If you’re looking to become an “online streamer” or are just interested in exploring this part of the digital world, it’s crucial to find the best equipment possible without breaking the bank. 

So before you run out and buy some fancy camera equipment, we’ve rounded up the best live streaming phones for you to consider:

• iPhone 13 Pro Max

Aside from being a flagship product of California tech giant Apple, iPhones are known to have excellent camera quality. Every new model that comes out has an upgraded camera that makes your photos and videos look even more professional.

2021’s iPhone 13 line is no exception. The best model out of the three variants, the iPhone 13 Pro Max, boasts a 12 megapixel (MP) camera system that comes with unique features such as telephoto, wide, and ultrawide lens.

The picture quality can capture videos up to 1080p without high-dynamic-range imaging (HDR). The smartphones of today can take pictures at a quality level never seen before. So you don’t need to spend $5,500 on a new camera when a smartphone can capture high quality images, fit in your pocket, and not completely break the bank.

The iPhone 13 Pro Max also offers HDR video recording with Dolby Vision that can capture up to 4K at 60 fps. Talk about sharp and lag-free videos! Worried your live stream might be shaky? This smartphone’s camera has cinematic video stabilization for videos with 720p to 4K.

• Huawei P30 Pro

Of course, Apple has competitors that are doing their best to compete with Apple’s high quality products. One such company is Huawei. With their P30 Pro, you get triple lenses equipped with Superzoom, 40MP sensor camera, and 20MP wide-angle lens.

You don’t have to miss a thing with this unit’s brilliant camera. They coupled its high-quality camera with a big screen, so you can see everything that’s happening!

Today’s phones boast excellent battery capacity and Huawei made sure not to forget this feature in the Huawei P30 Pro. This beefy battery capacity of 4200 mAh will make sure your live stream does not suddenly end without allowing you to say goodbye to your viewers.

Plus, you’ll have no problem live streaming videos in low-light with this phone. Huawei cameras are known for performing well even in bad lighting conditions.

You can record up to 4K at 30fps with this well-rounded Android-powered unit. What’s more, it costs significantly less than Apple’s iPhone 13 Pro Max.

So if you’re looking for a high-quality and affordable (at least when compared to the 13 Pro Max), Huawei’s P30 Pro line is worth looking into.

• Samsung Galaxy S21 Ultra

Samsung’s Galaxy S21 Ultra, released January 2021, can’t be left out. It’s currently Samsung’s best smartphone camera, with a 108Mp rear camera and 3 other rear lenses that have up to 12MP of clarity. The Samsung Galaxy S21 Ultra will take your live streaming to the next level.

Worried about the resolution of your livestream video with this phone? You don’t have to be. It can take up to 8K at 24fps! That’s the highest resolution on our list, and if you love razor-sharp videos, the S21 Ultra is definitely for you.

If you want to ensure your live streams have high-quality and are lag-free, then you can record 4K at 30fps videos without a problem.

The length of your stream shouldn’t be a problem with Samsung’s newest phone. It has a 5000 mAh non-removable battery that can let you stream videos for as long as your heart desires.

All in all, it may not be as cheap as our Huawei P30 Pro contender, but the price increase is definitely worth paying for if you want high quality livestream videos.

• Google Pixel 5

If you don’t follow tech news, you might not be aware that Google isn’t just a search engine. It’s also a smartphone manufacturer — and a good one at that.

While the competition in the smartphone market is tough, Google surely benefits from its household popularity. Their smartphones have undeniably high quality standards, and that shows with the Google Pixel 5.

The Google Pixel 5 is a lightweight and comfortable smartphone with an ultrawide 16MP main camera. You can record up to 4K at 60fps with this Google smartphone. That quality will allow for clear livestream videos, especially if you want all the details in the frame captured perfectly.

It also has a 4080 mAh battery that will ensure that your livestream sessions are not cut off too soon.

Google may not be the first brand that pops in your mind when you think of the best smartphone cameras, but they’re worth a look.

• OnePlus 8 Pro

One of the Chinese tech company’s most well-rounded and popular smartphones, the OnePlus 8 Pro, packs a powerful main camera that lets you shoot at 48MP or 12MP.

It also has a 119-degree field of view, which should be wide enough for your wide-capture livestream video. We know this is important when you want to stream landscapes.

You also don’t have to worry about the battery capacity of the OnePlus 8 Pro. It has a 4510 mAh battery that offers wireless charging! If that beefy battery isn’t enough for your livestream and interactions with your viewers, then the wireless charging feature should help.

What else should you consider when looking for a phone for live streaming?

Aside from the image quality of your live streams, one thing you also have to consider is the size of the screen, storage space, and battery capacity.

Battery capacity

There are numerous smartphones out there packed with cameras powerful enough to produce lag-free clarity, but in order to produce those kinds of videos to your viewers, battery life takes a hit.

So in looking for a smartphone for live streaming, it’s important to consider the battery capacity of the cell phone you want to use and if they offer convenient charging features such as fast and wireless charging.

We all know it’s not easy to livestream if you constantly have your phone plugged into a power bank or a wall socket.

Storage

If you’re streaming on a social media platform, you might think storage isn’t a factor for the device you’re using to live stream. But it actually is.

Your phone needs to store temporary data or you may also want to save your live stream in real-time so you can play it back for review, edit it for another video, or to save for future use.

Since your videos will be high quality, that means they’ll take a lot of space on your smartphone. That’s why you need a large storage capacity or you could run the risk of losing a recording when the cell phone’s free space runs out. 

Screen size

Another thing that’s notable with today’s popular smartphones is the screen size. With every release, the viewing area gets larger and larger. 

But not every phone with an excellent live streaming camera comes with decently sized screens.

You need your screen to see what you’re currently showing in your livestream and to also see what your viewers are saying in the comments section. If you’re not using another phone to view comments and reactions, you definitely need a smartphone with a big screen for streaming content.

Takeaways

We all see thousands of people sharing their daily lives online. There are people who prefer perfectly curated photos, videos, and there are the ones who like to stream content live.

The best phone for streaming with good resolutions can vary depending on what your other needs are aside from sharp image quality. Your budget, activity, and the content you want to stream will be major factors in searching for the perfect phone for live streaming.

Don’t grab the phone that only has the highest MP. You might risk suffering from mediocre battery life, small screen size, and small storage capacity that’ll make your live streaming experience difficult.

Look for a smartphone that has the right balance of image quality, battery life, and storage space. Make sure to look around for brands that sell phones with the specifications perfect for your needs and don’t be afraid to try new brands!

Who knows? You might find the live streaming community’s next best smartphone for livestream videos.

The post Which Phones Offer the Best Resolution for Live Streaming? appeared first on iParts and Phone Repair.